[PATCH v2 11/11] ALSA: remove calls to usb_pipe_type_check for control endpoints

[Greg Kroah-Hartman]

A USB device will always haev a bi-directional endpoint 0, that's just
how the devices work, so no need to check for that in a few quirk tests
as it will always pass.

Cc: Jaroslav Kysela <perex at perex.cz>
Cc: Takashi Iwai <tiwai at suse.com>
Cc: Alexander Tsoy <alexander at tsoy.me>
Cc: alsa-devel at alsa-project.org
Reported-by: Alan Stern <stern at rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
---
v2:
 - new patch, was not in v1 series, suggested by Alan.

 sound/usb/quirks.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index fc3aab04a0bc..35da4aa918c7 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -875,8 +875,6 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
 {
 	int ret;
 
-	if (usb_pipe_type_check(dev, usb_sndctrlpipe(dev, 0)))
-		return -EINVAL;
 	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				  0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				  1, 0, NULL, 0, 1000);
@@ -984,8 +982,6 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev)
 
 	dev_dbg(&dev->dev, "Waiting for Axe-Fx III to boot up...\n");
 
-	if (usb_pipe_type_check(dev, usb_sndctrlpipe(dev, 0)))
-		return -EINVAL;
 	/* If the Axe-Fx III has not fully booted, it will timeout when trying
 	 * to enable the audio streaming interface. A more generous timeout is
 	 * used here to detect when the Axe-Fx III has finished booting as the
@@ -1117,8 +1113,6 @@ static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
 {
 	int ret;
 
-	if (usb_pipe_type_check(dev, usb_sndctrlpipe(dev, 0)))
-		return -EINVAL;
 	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			      1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			      0x0, 0, NULL, 0, 1000);
-- 
2.28.0