[PATCH v2 0/4] soundwire: qcom: add support for mmio soundwire master

[Srinivas Kandagatla]

On 05/09/2020 18:39, Jonathan Marek wrote:
> This adds initial support for soundwire device on sm8250.
> 
> Tested with the "wsa" sdw device, which is simpler than the others.
> 
> v2 addresses some feedback, but I kept this series as simple as possible.
> In particular, I didn't implement CMD_NACKED from FIFO_STATUS, because
> the downstream driver doesn't define this bit, so I can't implement it.
> Soundwire works without it and It shouldn't be difficult to implement later.
> 
> Jonathan Marek (4):
>    soundwire: qcom: fix abh/ahb typo
>    soundwire: qcom: avoid dependency on CONFIG_SLIMBUS
>    soundwire: qcom: add support for mmio soundwire master devices
>    soundwire: qcom: add v1.5.1 compatible
> 
Hi Jonathan,
I have tested these patches on RB5 with WSA8810 and they work fine.

I can try to add support to command ignored in future, but for now these 
look good to me!


Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>


Thanks,
srini

>   .../bindings/soundwire/qcom,sdw.txt           |  1 +
>   drivers/soundwire/Kconfig                     |  2 +-
>   drivers/soundwire/qcom.c                      | 38 +++++++++++++++++--
>   3 files changed, 36 insertions(+), 5 deletions(-)
>