[PATCH v2 10/20] arm: dts: sunxi: h3/h5: Add DAI node for HDMI

[Clément Péron]

From: Marcus Cooper <codekipper at gmail.com>

Add the new DAI block for I2S2 which is used for HDMI audio.

Signed-off-by: Marcus Cooper <codekipper at gmail.com>
Signed-off-by: Clément Péron <peron.clem at gmail.com>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 22d533d18992..3dca6d89cab9 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -662,6 +662,19 @@ i2s1: i2s at 1c22400 {
 			status = "disabled";
 		};
 
+		i2s2: i2s at 1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>, <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		codec: codec at 1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-codec";
-- 
2.25.1