[PATCH v2 5/9] soundwire: qcom : use FIELD_{GET|PREP}

[Vinod Koul]

use FIELD_{GET|PREP} in qcom driver to get/set field values instead of
open coding masks and shift operations.
Also, remove now unused register shift defines

Signed-off-by: Vinod Koul <vkoul at kernel.org>
---
 drivers/soundwire/qcom.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index 915c2cf0c274..dafa3f3dd1ab 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -43,13 +43,10 @@
 #define SWRM_CMD_FIFO_RD_FIFO_ADDR				0x318
 #define SWRM_ENUMERATOR_CFG_ADDR				0x500
 #define SWRM_MCP_FRAME_CTRL_BANK_ADDR(m)		(0x101C + 0x40 * (m))
-#define SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT			3
 #define SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK			GENMASK(2, 0)
 #define SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK			GENMASK(7, 3)
-#define SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT			0
 #define SWRM_MCP_CFG_ADDR					0x1048
 #define SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK		GENMASK(21, 17)
-#define SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_SHFT		0x11
 #define SWRM_DEF_CMD_NO_PINGS					0x1f
 #define SWRM_MCP_STATUS						0x104C
 #define SWRM_MCP_STATUS_BANK_NUM_MASK				BIT(0)
@@ -284,8 +281,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
 	u32 val;
 
 	/* Clear Rows and Cols */
-	val = (SWRM_MAX_ROW_VAL << SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT |
-	       SWRM_MIN_COL_VAL << SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT);
+	val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, SWRM_MAX_ROW_VAL);
+	val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, SWRM_MIN_COL_VAL);
 
 	ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val);
 
@@ -298,9 +295,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
 
 	/* Configure No pings */
 	ctrl->reg_read(ctrl, SWRM_MCP_CFG_ADDR, &val);
-	val &= ~SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK;
-	val |= (SWRM_DEF_CMD_NO_PINGS <<
-		SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_SHFT);
+	val |= FIELD_PREP(SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK, SWRM_DEF_CMD_NO_PINGS);
 	ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);
 
 	/* Configure number of retries of a read/write cmd */
@@ -355,11 +350,8 @@ static int qcom_swrm_pre_bank_switch(struct sdw_bus *bus)
 
 	ctrl->reg_read(ctrl, reg, &val);
 
-	val &= ~SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK;
-	val &= ~SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK;
-
-	val |= (SWRM_MAX_ROW_VAL << SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT |
-		SWRM_MAX_COL_VAL << SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT);
+	val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, SWRM_MAX_COL_VAL);
+	val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, SWRM_MAX_ROW_VAL);
 
 	return ctrl->reg_write(ctrl, reg, val);
 }
@@ -693,8 +685,8 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
 
 	ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
 
-	ctrl->num_dout_ports = val & SWRM_COMP_PARAMS_DOUT_PORTS_MASK;
-	ctrl->num_din_ports = (val & SWRM_COMP_PARAMS_DIN_PORTS_MASK) >> 5;
+	ctrl->num_dout_ports = FIELD_GET(SWRM_COMP_PARAMS_DOUT_PORTS_MASK, val);
+	ctrl->num_din_ports = FIELD_GET(SWRM_COMP_PARAMS_DIN_PORTS_MASK, val);
 
 	ret = of_property_read_u32(np, "qcom,din-ports", &val);
 	if (ret)
-- 
2.26.2