[PATCH v2 0/7] Add support for Rpi4b + Cirrus Lochnagar2 and CS47L15
Richard Fitzgerald
rf at opensource.cirrus.com
Fri Oct 16 19:35:34 CEST 2020
This set of patches provides support for using the Raspberry Pi 4b with
a Cirrus Logic Lochnagar 2 audio development platform plus Cirrus Logic
CS47L15 codec.
Patches are needed to audio-graph-card to enable support for setting the
component sysclks and plls. The codec sysclks and plls cannot be placed
under the clock framwork because they are I2C/SPI-connected peripherals
and access to the registers would cause a nested get of the I2C/SPI bus
clock. The clock framework does not support this and it would result in
a deadlock.
Richard Fitzgerald (7):
of: base: Add of_count_phandle_with_fixed_args()
ASoC: audio-graph-card: Add plls and sysclks DT bindings
ASoC: audio-graph-card: Support setting component plls and sysclks
ASoC: arizona: Allow codecs to be selected from kernel config
ASoC: madera: Allow codecs to be selected from kernel config
ARM: dts: Add dts for RPi4b + Cirrus Logic Lochnagar2 + CS47L15
MAINTAINERS: Add dts for Cirrus Logic Lochnagar on RPi4
.../bindings/sound/audio-graph-card.txt | 44 ++++
MAINTAINERS | 1 +
arch/arm/boot/dts/Makefile | 1 +
...bcm2711-rpi4b-cirrus-lochnagar-cs47l15.dts | 166 +++++++++++++++
.../dts/bcm2711-rpi4b-cirrus-lochnagar.dtsi | 201 ++++++++++++++++++
drivers/of/base.c | 73 +++++--
include/linux/of.h | 9 +
include/sound/simple_card_utils.h | 24 +++
sound/soc/codecs/Kconfig | 18 +-
sound/soc/generic/audio-graph-card.c | 16 +-
sound/soc/generic/simple-card-utils.c | 184 ++++++++++++++++
11 files changed, 703 insertions(+), 34 deletions(-)
create mode 100644 arch/arm/boot/dts/bcm2711-rpi4b-cirrus-lochnagar-cs47l15.dts
create mode 100644 arch/arm/boot/dts/bcm2711-rpi4b-cirrus-lochnagar.dtsi
--
2.20.1
More information about the Alsa-devel
mailing list