[PATCH] ASoC: Intel: atom: Remove duplicate kconfigs
Cezary Rojewski
cezary.rojewski at intel.com
Mon Oct 12 11:50:05 CEST 2020
SND_SST_IPC and its _PCI and _ACPI variants all target
sound/soc/intel/atom solution alone. SND_SST_IPC is the core component,
required for PCI and ACPI based atom platforms both. _PCI and _ACPI
target Merrifield/Edison and Baytrial/Cherrytrail platforms
respectively.
On top of that, there is an equivalent set of configs targeting the same
solution:
- SND_SST_ATOM_HIFI2_PLATFORM (core)
- SND_SST_ATOM_HIFI2_PLATFORM_PCI
- SND_SST_ATOM_HIFI2_PLATFORM_ACPI
As both sets do the same job - allow for granular platform selection -
remove the duplicate set and rely on SND_SST_ATOM_HIFI2_PLATOFRM_XXX
configs alone.
Signed-off-by: Cezary Rojewski <cezary.rojewski at intel.com>
---
sound/soc/intel/Kconfig | 18 ------------------
sound/soc/intel/atom/Makefile | 2 +-
sound/soc/intel/atom/sst/Makefile | 6 +++---
3 files changed, 4 insertions(+), 22 deletions(-)
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index d5bae5d1ab6f..a5b446d5af19 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -15,22 +15,6 @@ config SND_SOC_INTEL_SST_TOPLEVEL
if SND_SOC_INTEL_SST_TOPLEVEL
-config SND_SST_IPC
- tristate
- # This option controls the IPC core for HiFi2 platforms
-
-config SND_SST_IPC_PCI
- tristate
- select SND_SST_IPC
- # This option controls the PCI-based IPC for HiFi2 platforms
- # (Medfield, Merrifield).
-
-config SND_SST_IPC_ACPI
- tristate
- select SND_SST_IPC
- # This option controls the ACPI-based IPC for HiFi2 platforms
- # (Baytrail, Cherrytrail)
-
config SND_SOC_INTEL_SST
tristate
@@ -57,7 +41,6 @@ config SND_SST_ATOM_HIFI2_PLATFORM
config SND_SST_ATOM_HIFI2_PLATFORM_PCI
tristate "PCI HiFi2 (Merrifield) Platforms"
depends on X86 && PCI
- select SND_SST_IPC_PCI
select SND_SST_ATOM_HIFI2_PLATFORM
help
If you have a Intel Merrifield/Edison platform, then
@@ -70,7 +53,6 @@ config SND_SST_ATOM_HIFI2_PLATFORM_ACPI
tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms"
default ACPI
depends on X86 && ACPI && PCI
- select SND_SST_IPC_ACPI
select SND_SST_ATOM_HIFI2_PLATFORM
select SND_SOC_ACPI_INTEL_MATCH
select IOSF_MBI
diff --git a/sound/soc/intel/atom/Makefile b/sound/soc/intel/atom/Makefile
index a9326d5ec44c..c66f03f5d8d6 100644
--- a/sound/soc/intel/atom/Makefile
+++ b/sound/soc/intel/atom/Makefile
@@ -6,4 +6,4 @@ snd-soc-sst-atom-hifi2-platform-objs := sst-mfld-platform-pcm.o \
obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM) += snd-soc-sst-atom-hifi2-platform.o
# DSP driver
-obj-$(CONFIG_SND_SST_IPC) += sst/
+obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM) += sst/
diff --git a/sound/soc/intel/atom/sst/Makefile b/sound/soc/intel/atom/sst/Makefile
index f17c905df3e2..5761d30a5f9d 100644
--- a/sound/soc/intel/atom/sst/Makefile
+++ b/sound/soc/intel/atom/sst/Makefile
@@ -3,6 +3,6 @@ snd-intel-sst-core-objs := sst.o sst_ipc.o sst_stream.o sst_drv_interface.o sst_
snd-intel-sst-pci-objs += sst_pci.o
snd-intel-sst-acpi-objs += sst_acpi.o
-obj-$(CONFIG_SND_SST_IPC) += snd-intel-sst-core.o
-obj-$(CONFIG_SND_SST_IPC_PCI) += snd-intel-sst-pci.o
-obj-$(CONFIG_SND_SST_IPC_ACPI) += snd-intel-sst-acpi.o
+obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM) += snd-intel-sst-core.o
+obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI) += snd-intel-sst-pci.o
+obj-$(CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI) += snd-intel-sst-acpi.o
--
2.17.1
More information about the Alsa-devel
mailing list