[PATCH 2/2] ASoC: tas2764: Add the driver for the TAS2764
Dan Murphy
dmurphy at ti.com
Fri Oct 2 13:49:07 CEST 2020
Mark
Thanks for the review
On 10/1/20 11:25 AM, Mark Brown wrote:
> On Wed, Sep 30, 2020 at 11:38:09AM -0500, Dan Murphy wrote:
>
> This all looks good - a few very minor things below but nothing
> substantial:
>
>> + default:
>> + dev_err(tas2764->dev, "Not supported evevt\n");
>> + return -EINVAL;
> evevt -> event
OK
>
>> +static int tas2764_mute(struct snd_soc_dai *dai, int mute, int direction)
>> +{
>> + struct snd_soc_component *component = dai->component;
>> + int ret = snd_soc_component_update_bits(component, TAS2764_PWR_CTRL,
>> + TAS2764_PWR_CTRL_MASK,
>> + mute ? TAS2764_PWR_CTRL_MUTE : 0);
>> +
>> + if (ret < 0)
>> + return ret;
> This looks weird with the ternery operator and extreme indentation -
> could you please at least split the declaration of ret from the call to
> make the line length a bit extreme?
I will fix it up
>> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
>> + case SND_SOC_DAIFMT_I2S:
>> + case SND_SOC_DAIFMT_DSP_A:
>> + tdm_rx_start_slot = 1;
>> + break;
>> + case SND_SOC_DAIFMT_DSP_B:
>> + case SND_SOC_DAIFMT_LEFT_J:
>> + tdm_rx_start_slot = 0;
>> + break;
> I'm not seeing any other handling that distinguishes between the I2S and
> DSP modes anywhere - I'm guessing this is because the device is really
> only implementing the DSP modes but because it's mono this is compatible
> with the I2S modes? It'd be worth having a comment saying this since
> while that would be OK not distinguishing between modes properly is a
> common error in drivers so it'd help avoid cut'n'paste issues if someone
> uses this code as a reference.
Ah it does do LEFT J and Right J so I will fix this
>> +static int tas2764_register_codec(struct tas2764_priv *tas2764)
>> +{
>> + return devm_snd_soc_register_component(tas2764->dev,
>> + &soc_component_driver_tas2764,
>> + tas2764_dai_driver,
>> + ARRAY_SIZE(tas2764_dai_driver));
>> +}
> This is a bit odd - can we not just inline the component registration
> rather than having this function?
I will eliminate this completely and move to i2c_probe
Dan
More information about the Alsa-devel
mailing list