Lenovo t14s amd only Dummy Device as output in pulseaudio

[GitHub issues - opened]

alsa-project/alsa-ucm-conf issue #61 was opened from J-Bu:

Hi,

since upgrading to alsa-ucm 1.2.4 I only have a "Dummy Device" instead of the internal speaker. When using alsa-ucm 1.2.3 all is fine.  I'm not quite sure if this is a pulseaudio or alsa issue maybe you can guide me in the right direction

Output of lspci:
```
06:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 1637
	Subsystem: Lenovo Device 5082
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 85
	Region 0: Memory at fd3c8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [48] Vendor Specific Information: Len=08 <?>
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME+
	Capabilities: [64] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 16GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 16GT/s (ok), Width x16 (ok)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
			 10BitTagComp+ 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee09000  Data: 4024
	Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
	Kernel driver in use: snd_hda_intel
```

I bisected the issue:
```
git bisect start
# good: [dbac4c3e7ad05b4eb17964688fd9f07c61b8d336] ucm2: fix more indentation issues
git bisect good dbac4c3e7ad05b4eb17964688fd9f07c61b8d336
# bad: [334b12e9a796cddf70779b68418ee7ad52ba1d14] sof-soundwire: use the codecs/hda/hdmi.conf macro
git bisect bad 334b12e9a796cddf70779b68418ee7ad52ba1d14
# bad: [8a9609cc694cb1de501a67d7c091edaa9a338932] cht-bsw-rt5672: Add Lenovo ThinkPad 10 specific configuration
git bisect bad 8a9609cc694cb1de501a67d7c091edaa9a338932
# good: [9f2dae6a560c60593c24aa4b85aed07418f9dd8e] sof-soundwire: initial UCM2 version
git bisect good 9f2dae6a560c60593c24aa4b85aed07418f9dd8e
# bad: [73c105b4707b601de63d1f24641e65e5ac23f3a6] DB820c/DB845c: move to Qualcomm/ tree
git bisect bad 73c105b4707b601de63d1f24641e65e5ac23f3a6
# good: [38e5906cd1b18b6f4df5a1d35ca535325e7b65a0] sof-hda-dsp: fix the device order (Hdmi devices)
git bisect good 38e5906cd1b18b6f4df5a1d35ca535325e7b65a0
# bad: [6b8518c431cac18a825bd7342875f54b44cb7afc] DAISY-I2S: move to Samsung/snow/snow.conf
git bisect bad 6b8518c431cac18a825bd7342875f54b44cb7afc
# bad: [dcef48f13d4f5db79b006755074940b94730a883] HDA-Intel: add support for AMD acp microphone devices
git bisect bad dcef48f13d4f5db79b006755074940b94730a883
# first bad commit: [dcef48f13d4f5db79b006755074940b94730a883] HDA-Intel: add support for AMD acp microphone devices
```

Issue URL     : https://github.com/alsa-project/alsa-ucm-conf/issues/61
Repository URL: https://github.com/alsa-project/alsa-ucm-conf