[PATCH 2/5] ASoC: Intel: catpt: Correct clock selection for dai trigger

[Cezary Rojewski]

During stream start DSP firmware requires LPCS disabled as that moment in
time is resource heavy. Currently high-clock is selected on start of
second stream onwards while low-clock is re-selected before stream
actually leaves RESUME state i.e. PAUSE_STREAM call. Fix this by always
updating clock before RESUME_STREAM and directly after PAUSE_STREAM.

Fixes: a126750fc865 ("ASoC: Intel: catpt: PCM operations")
Signed-off-by: Cezary Rojewski <cezary.rojewski at intel.com>
---
 sound/soc/intel/catpt/pcm.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/sound/soc/intel/catpt/pcm.c b/sound/soc/intel/catpt/pcm.c
index afdf6be605aa..408e64e3b5fb 100644
--- a/sound/soc/intel/catpt/pcm.c
+++ b/sound/soc/intel/catpt/pcm.c
@@ -458,10 +458,6 @@ static int catpt_dai_prepare(struct snd_pcm_substream *substream,
 	if (ret)
 		return CATPT_IPC_ERROR(ret);
 
-	ret = catpt_dsp_update_lpclock(cdev);
-	if (ret)
-		return ret;
-
 	ret = catpt_dai_apply_usettings(dai, stream);
 	if (ret)
 		return ret;
@@ -500,6 +496,7 @@ static int catpt_dai_trigger(struct snd_pcm_substream *substream, int cmd,
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 	resume_stream:
+		catpt_dsp_update_lpclock(cdev);
 		ret = catpt_ipc_resume_stream(cdev, stream->info.stream_hw_id);
 		if (ret)
 			return CATPT_IPC_ERROR(ret);
@@ -507,11 +504,11 @@ static int catpt_dai_trigger(struct snd_pcm_substream *substream, int cmd,
 
 	case SNDRV_PCM_TRIGGER_STOP:
 		stream->prepared = false;
-		catpt_dsp_update_lpclock(cdev);
 		fallthrough;
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		ret = catpt_ipc_pause_stream(cdev, stream->info.stream_hw_id);
+		catpt_dsp_update_lpclock(cdev);
 		if (ret)
 			return CATPT_IPC_ERROR(ret);
 		break;
-- 
2.17.1