[PATCH v2] ALSA: usb-audio: disable 96khz support for HUAWEI USB-C HEADSET
Macpaul Lin
macpaul.lin at mediatek.com
Tue Nov 10 09:42:54 CET 2020
The HUAWEI USB-C headset (VID:0x12d1, PID:0x3a07) reported it supports
96khz. However there will be some random issue under 96khz.
Not sure if there is any alternate setting could be applied.
Hence 48khz is suggested to be applied at this moment.
Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
Signed-off-by: Eddie Hung <eddie.hung at mediatek.com>
Cc: stable at vger.kernel.org
---
Changes for v2:
- Fix build error.
- Add Cc: stable at vger.kernel.org
sound/usb/format.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 1b28d01..7a4837b 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -202,6 +202,7 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
fp->rate_min = fp->rate_max = 0;
for (r = 0, idx = offset + 1; r < nr_rates; r++, idx += 3) {
unsigned int rate = combine_triple(&fmt[idx]);
+ struct usb_device *udev = chip->dev;
if (!rate)
continue;
/* C-Media CM6501 mislabels its 96 kHz altsetting */
@@ -217,6 +218,11 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof
(chip->usb_id == USB_ID(0x041e, 0x4064) ||
chip->usb_id == USB_ID(0x041e, 0x4068)))
rate = 8000;
+ /* Huawei headset can't support 96kHz fully */
+ if (rate == 96000 &&
+ chip->usb_id == USB_ID(0x12d1, 0x3a07) &&
+ le16_to_cpu(udev->descriptor.bcdDevice) == 0x49)
+ continue;
fp->rate_table[fp->nr_rates] = rate;
if (!fp->rate_min || rate < fp->rate_min)
--
1.7.9.5
More information about the Alsa-devel
mailing list