[PATCH v3 12/21] ASoC: fsl: use snd_soc_xxx_active()

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

We have snd_soc_dai/dai_stream/component_active() macro
This patch uses it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
---
 sound/soc/fsl/fsl_esai.c  | 2 +-
 sound/soc/fsl/fsl_spdif.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 84290be778f0..edcf4036697c 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -488,7 +488,7 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 {
 	struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
 
-	if (!dai->active) {
+	if (!snd_soc_dai_active(dai)) {
 		/* Set synchronous mode */
 		regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR,
 				   ESAI_SAICR_SYNC, esai_priv->synchronous ?
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index c711d2d93280..1b2e516f9162 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -466,7 +466,7 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream,
 	int ret;
 
 	/* Reset module and interrupts only for first initialization */
-	if (!cpu_dai->active) {
+	if (!snd_soc_dai_active(cpu_dai)) {
 		ret = clk_prepare_enable(spdif_priv->coreclk);
 		if (ret) {
 			dev_err(&pdev->dev, "failed to enable core clock\n");
@@ -554,7 +554,7 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
 	regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr);
 
 	/* Power down SPDIF module only if tx&rx are both inactive */
-	if (!cpu_dai->active) {
+	if (!snd_soc_dai_active(cpu_dai)) {
 		spdif_intr_status_clear(spdif_priv);
 		regmap_update_bits(regmap, REG_SPDIF_SCR,
 				SCR_LOW_POWER, SCR_LOW_POWER);
-- 
2.17.1