[PATCHv3 4/5] ASoC: da7213: move set_pll to codec level

[Sebastian Reichel]

Move set_pll function to component level, so that it can be used at
both component and DAI level.

Reviewed-by: Adam Thomson <Adam.Thomson.Opensource at diasemi.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 sound/soc/codecs/da7213.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
index 9686948b16ea..3e6ad996741b 100644
--- a/sound/soc/codecs/da7213.c
+++ b/sound/soc/codecs/da7213.c
@@ -1392,10 +1392,10 @@ static int da7213_set_component_sysclk(struct snd_soc_component *component,
 }
 
 /* Supported PLL input frequencies are 32KHz, 5MHz - 54MHz. */
-static int da7213_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
-			      int source, unsigned int fref, unsigned int fout)
+static int da7213_set_component_pll(struct snd_soc_component *component,
+				    int pll_id, int source,
+				    unsigned int fref, unsigned int fout)
 {
-	struct snd_soc_component *component = codec_dai->component;
 	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
 
 	u8 pll_ctrl, indiv_bits, indiv;
@@ -1507,7 +1507,6 @@ static int da7213_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
 static const struct snd_soc_dai_ops da7213_dai_ops = {
 	.hw_params	= da7213_hw_params,
 	.set_fmt	= da7213_set_dai_fmt,
-	.set_pll	= da7213_set_dai_pll,
 	.digital_mute	= da7213_mute,
 };
 
@@ -1845,6 +1844,7 @@ static const struct snd_soc_component_driver soc_component_dev_da7213 = {
 	.dapm_routes		= da7213_audio_map,
 	.num_dapm_routes	= ARRAY_SIZE(da7213_audio_map),
 	.set_sysclk		= da7213_set_component_sysclk,
+	.set_pll		= da7213_set_component_pll,
 	.idle_bias_on		= 1,
 	.use_pmdown_time	= 1,
 	.endianness		= 1,
-- 
2.26.2