TLV320AIC31xx recovery after a SPKVDD power glitch
Dexter Travis
dexter.travis at precisionplanting.com
Fri May 1 15:08:09 CEST 2020
I believe I found a suitable solution. I intend to put the system
into standby mode and resume from standby when i enter this reduced
power battery backed up state.
I added the following to the tlv320aic31xx.c and eukrea drivers. I
believe the critical changes is the suspend function for eureka which
unregisters the card as well as the remove function in tlv320aic31xx.c
which cleans up the regulator notifiers. This allows me to
unregister/remove the card on entering low power and restore it
correctly on getting power back.
I am now working on using a single GPIO to trigger suspend on falling
edge and resume on rising edge.
I can clean up the below patch and trim it down to just the essentials
if it is of interest to the community. This is based on our modified
eukrea-tlv320 driver for use with the TLV320AIC3120. When cleaned up
I believe it can be used with the mainline eukrea driver as well.
>From 8c7998dba1510f2cbab20c69af1f89c807018a6e Mon Sep 17 00:00:00 2001
From: Dexter Travis <dexter.travis at precisionplanting.com>
Date: Wed, 29 Apr 2020 14:24:56 -0500
Subject: [PATCH] add suspend/remove functions to eukrea and tlv to register
and unregister the sound card on suspend/resume.
---
sound/soc/codecs/tlv320aic31xx.c | 45 +++++++++++++++++++++++++++++++-
sound/soc/fsl/eukrea-tlv320.c | 17 ++++++++++++
2 files changed, 61 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index 31daa60695bd..e7db7399fee7 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -1314,12 +1314,22 @@ static int aic31xx_set_jack(struct
snd_soc_component *component,
return 0;
}
+static int aic31xx_codec_suspend(struct snd_soc_component *component) {
+ printk("DGT: %s:%d\n", __func__, __LINE__);
+ return 0;
+}
+
+static int aic31xx_codec_resume(struct snd_soc_component *component) {
+ printk("DGT: %s, %d\n", __func__, __LINE__);
+ return 0;
+}
+
static int aic31xx_codec_probe(struct snd_soc_component *component)
{
struct aic31xx_priv *aic31xx = snd_soc_component_get_drvdata(component);
int i, ret;
- dev_dbg(aic31xx->dev, "## %s\n", __func__);
+ dev_dbg(aic31xx->dev, "DGT ## %s\n", __func__);
aic31xx->component = component;
@@ -1357,8 +1367,27 @@ static int aic31xx_codec_probe(struct
snd_soc_component *component)
return 0;
}
+static void aic31xx_codec_remove(struct snd_soc_component *component) {
+ struct aic31xx_priv *aic31xx = snd_soc_component_get_drvdata(component);
+ int i;
+
+ dev_dbg(aic31xx->dev, "DGT: ## %s\n", __func__);
+
+ for (i = 0; i < ARRAY_SIZE(aic31xx->supplies); i++) {
+ aic31xx->disable_nb[i].nb.notifier_call =
+ aic31xx_regulator_event;
+ aic31xx->disable_nb[i].aic31xx = aic31xx;
+ devm_regulator_unregister_notifier(
+ aic31xx->supplies[i].consumer,
+ &aic31xx->disable_nb[i].nb);
+ }
+};
+
static const struct snd_soc_component_driver soc_codec_driver_aic31xx = {
.probe = aic31xx_codec_probe,
+ .suspend = aic31xx_codec_suspend,
+ .resume = aic31xx_codec_resume,
+ .remove = aic31xx_codec_remove,
.set_jack = aic31xx_set_jack,
.set_bias_level = aic31xx_set_bias_level,
.controls = common31xx_snd_controls,
@@ -1372,6 +1401,7 @@ static const struct snd_soc_component_driver
soc_codec_driver_aic31xx = {
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
+
};
static const struct snd_soc_dai_ops aic31xx_dai_ops = {
@@ -1698,11 +1728,24 @@ static const struct i2c_device_id aic31xx_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, aic31xx_i2c_id);
+static int aic31xx_i2c_suspend(struct device *dev, pm_message_t state) {
+
+ printk("DGT: %d, %s:%d\n", state.event, __func__, __LINE__);
+ return 0;
+}
+
+static int aic31xx_i2c_resume(struct device *dev) {
+ printk("DGT: %s, %d\n", __func__, __LINE__);
+ return 0;
+}
+
static struct i2c_driver aic31xx_i2c_driver = {
.driver = {
.name = "tlv320aic31xx-codec",
.of_match_table = of_match_ptr(tlv320aic31xx_of_match),
.acpi_match_table = ACPI_PTR(aic31xx_acpi_match),
+ .suspend = aic31xx_i2c_suspend,
+ .resume = aic31xx_i2c_resume,
},
.probe = aic31xx_i2c_probe,
.id_table = aic31xx_i2c_id,
diff --git a/sound/soc/fsl/eukrea-tlv320.c b/sound/soc/fsl/eukrea-tlv320.c
index 09133b085fd2..f4a598a5f18e 100644
--- a/sound/soc/fsl/eukrea-tlv320.c
+++ b/sound/soc/fsl/eukrea-tlv320.c
@@ -82,6 +82,18 @@ static struct snd_soc_card eukrea_tlv320 = {
.num_links = 1,
};
+static int eukrea_tlv320_suspend(struct platform_device *pdev,
pm_message_t state) {
+ printk("DGT: %s,%d state: %d\n", __func__, __LINE__, state.event);
+ snd_soc_unregister_card(&eukrea_tlv320);
+ return 0;
+}
+
+static int eukrea_tlv320_resume(struct platform_device *pdev) {
+ printk("DGT: %s,%d\n", __func__, __LINE__);
+ snd_soc_register_card(&eukrea_tlv320);
+ return 0;
+}
+
static int eukrea_tlv320_probe(struct platform_device *pdev)
{
int ret;
@@ -89,6 +101,7 @@ static int eukrea_tlv320_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct device_node *ssi_np = NULL, *codec_np = NULL;
struct clk *codec_clk = NULL;
+ printk("DGT: %s,%d\n", __func__, __LINE__);
eukrea_tlv320.dev = &pdev->dev;
if (np) {
ret = snd_soc_of_parse_card_name(&eukrea_tlv320,
@@ -120,6 +133,7 @@ static int eukrea_tlv320_probe(struct platform_device *pdev)
"fsl,mux-int-port node missing or invalid.\n");
goto err;
}
+
ret = of_property_read_u32(np, "fsl,mux-ext-port", &ext_port);
if (ret) {
dev_err(&pdev->dev,
@@ -214,6 +228,7 @@ static int eukrea_tlv320_probe(struct platform_device *pdev)
static int eukrea_tlv320_remove(struct platform_device *pdev)
{
+ printk("DGT: %s,%d\n", __func__, __LINE__);
snd_soc_unregister_card(&eukrea_tlv320);
return 0;
@@ -232,6 +247,8 @@ static struct platform_driver eukrea_tlv320_driver = {
},
.probe = eukrea_tlv320_probe,
.remove = eukrea_tlv320_remove,
+ .suspend = eukrea_tlv320_suspend,
+ .resume = eukrea_tlv320_resume,
};
module_platform_driver(eukrea_tlv320_driver);
--
2.24.1
On Mon, Apr 27, 2020 at 1:56 PM Dexter Travis
<dexter.travis at precisionplanting.com> wrote:
>
> I have a production agriculture display system using a TLV320AIC3120
> for sound output to a speaker built into the monitor. The primary
> processor is an NXP IMX6 Dual Plus. The system has an internal battery
> backup but not all voltage rails are backed by the battery. In
> particular SPKVDD the 5V rail to the TLV320AIC3120 is not backed up.
> The rest of the voltage rails to this device are backed by battery.
> After a power glitch we do not emit sound. Using dynamic debug and
> adding some additional messages to the log It appears the driver is
> working the same both before and after the power glitch.
> We developed this a few years ago using the Freescale/NXP (fsl)
> eureka-tlv320 (with slight modifications for the tlv320aic31xx) and
> tlv320aic31xx.c drivers.
>
> As an experiment i compiled both the eukrea-tlv320 and the
> tlv320aic31xx drivers as modules. This worked as expected before the
> glitch. After a glitch if I manually remove the modules and re-insert
> them sound can be restored.
>
> We have a user space application that can detect the power loss and if
> the loss is persistent will gracefully shutdown the system. When
> power is restored we would like to use this to tell the driver to
> perform some kind of restorative action. I have tried triggering
> through sysfs various resets to the tlv320aic3120 without success. So
> far only a full module remove of both eukrea and tlv320 will restore
> sound. remove and re-insert of either driver by itself does not work.
>
> I have a few questions and areas where I would like advice.
>
> 0) What am i missing or doing wrong? Should I be taking a different
> approach altogether to this problem?
>
> 1) Should I migrate to simple-audio-card instead of eukrea-tlv320?
>
> 2) Suggestions on what needs to be reset/restored after the power rail
> comes back?
>
> 3) Suggestions on how best to trigger the reset/restore from either
> user space or the kernel?
>
> Below is the relevant sections of our devicetree.
>
>
> sound {
> compatible = "eukrea,asoc-tlv320";
> eukrea,model = "pp-gen3display-tlv320aic3120";
> ssi-controller = <&ssi2>;
> fsl,mux-int-port = <2>;
> fsl,mux-ext-port = <3>;
>
> clocks = <&clks IMX6QDL_CLK_CKO>;
> };
>
> &i2c1 {
> clock-frequency = <100000>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_i2c1>;
> status = "okay";
>
> tlv320aic3120: tlv320aic3120 at 18 {
> reg = <0x18>;
> };
> ...
>
> &ssi2 {
> codec-handle = <&tlv320aic3120>;
> status = "okay";
> };
> &audmux {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_audmux>;
> status = "okay";
> };
> pinctrl_audmux: audmuxgrp {
> fsl,pins = <
> MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
> MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
> MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
> MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
> MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x17059
> MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x130b0
> >;
> };
>
>
> Attached is our changes to the eukrea driver to support the
> TLV320AIC31xx in our system.
>
>
> Thank you,
>
>
> Dexter Travis
More information about the Alsa-devel
mailing list