[PATCH 2/3] ASoC: fsl_esai: Add support for imx8qm

Shengjiu Wang shengjiu.wang at nxp.com
Fri May 1 10:12:05 CEST 2020


The difference for esai on imx8qm is that DMA device is EDMA.

EDMA requires the period size to be multiple of maxburst. Otherwise
the remaining bytes are not transferred and thus noise is produced.

We can handle this issue by adding a constraint on
SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.

Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
---
 sound/soc/fsl/fsl_esai.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index bac65ba7fbad..61b5c0bde788 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -26,10 +26,12 @@
  *
  * @imx: for imx platform
  * @reset_at_xrun: flags for enable reset operaton
+ * @use_edma: edma is used.
  */
 struct fsl_esai_soc_data {
 	bool imx;
 	bool reset_at_xrun;
+	bool use_edma;
 };
 
 /**
@@ -88,16 +90,25 @@ struct fsl_esai {
 static struct fsl_esai_soc_data fsl_esai_vf610 = {
 	.imx = false,
 	.reset_at_xrun = true,
+	.use_edma = false,
 };
 
 static struct fsl_esai_soc_data fsl_esai_imx35 = {
 	.imx = true,
 	.reset_at_xrun = true,
+	.use_edma = false,
 };
 
 static struct fsl_esai_soc_data fsl_esai_imx6ull = {
 	.imx = true,
 	.reset_at_xrun = false,
+	.use_edma = false,
+};
+
+static struct fsl_esai_soc_data fsl_esai_imx8qm = {
+	.imx = true,
+	.reset_at_xrun = false,
+	.use_edma = true,
 };
 
 static irqreturn_t esai_isr(int irq, void *devid)
@@ -513,6 +524,7 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 			    struct snd_soc_dai *dai)
 {
 	struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+	bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 
 	if (!dai->active) {
 		/* Set synchronous mode */
@@ -527,6 +539,12 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 				   ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(2));
 	}
 
+	if (esai_priv->soc->use_edma)
+		snd_pcm_hw_constraint_step(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+					   tx ? esai_priv->dma_params_tx.maxburst :
+					   esai_priv->dma_params_rx.maxburst);
+
 	return 0;
 
 }
@@ -1094,6 +1112,7 @@ static const struct of_device_id fsl_esai_dt_ids[] = {
 	{ .compatible = "fsl,imx35-esai", .data = &fsl_esai_imx35 },
 	{ .compatible = "fsl,vf610-esai", .data = &fsl_esai_vf610 },
 	{ .compatible = "fsl,imx6ull-esai", .data = &fsl_esai_imx6ull },
+	{ .compatible = "fsl,imx8qm-esai", .data = &fsl_esai_imx8qm },
 	{}
 };
 MODULE_DEVICE_TABLE(of, fsl_esai_dt_ids);
-- 
2.21.0



More information about the Alsa-devel mailing list