[PATCH] quirk for Pioneer DJ DJM-250MK2 usb sound card
Takashi Iwai
tiwai at suse.de
Thu Mar 26 10:29:43 CET 2020
On Thu, 26 Mar 2020 10:20:39 +0100,
Jaroslav Kysela wrote:
>
> Dne 04. 03. 20 v 17:03 František Kučera napsal(a):
> > Dne 24. 02. 20 v 17:29 František Kučera napsal(a):
> >> Hello,
> >>
> >> I have created a quirk that adds support for the Pioneer DJ DJM-250MK2 mixer (acts like a USB sound card, but Vendor Specific Class).
> >>
> >> Output (from computer to card) is working: 8 channels, 48 000 Hz, S24_3LE.
> >>
> >> Input is not working. I tried, but I was unable to make it working even under an officially supported OS with Pioneer drivers - Audacity or Mixxx see the channels, but there is no signal. It probably works only with Pioneer proprietary application. But I hope that even mere output support will be useful for someone. (it is usable for playback, just not for DVS)
> >>
> >> Franta
> >>
> >> Signed-off-by: František Kučera <franta-linux at frantovo.cz>
> >> ---
> >> sound/usb/quirks-table.h | 42 ++++++++++++++++++++++++++++++++++++++++++
> >> 1 file changed, 42 insertions(+)
> >>
> >> diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
> >> index d187aa6d50db..dcaf9eed9a41 100644
> >> --- a/sound/usb/quirks-table.h
> >> +++ b/sound/usb/quirks-table.h
> >> @@ -3592,5 +3592,47 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
> >> }
> >> }
> >> },
> >> +{
> >> + /*
> >> + * Pioneer DJ DJM-250MK2
> >> + * PCM is 8 channels out @ 48 fixed (endpoints 0x01).
> >> + * The output from computer to the mixer is usable.
> >> + *
> >> + * The input (phono or line to computer) is not working.
> >> + * It should be at endpoint 0x82 and probably also 8 channels,
> >> + * but it seems that it works only with Pioneer proprietary software.
> >> + * Even on officially supported OS, the Audacity was unable to record
> >> + * and Mixxx to recognize the control vinyls.
> >> + */
> >> + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017),
> >> + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
> >> + .ifnum = QUIRK_ANY_INTERFACE,
> >> + .type = QUIRK_COMPOSITE,
> >> + .data = (const struct snd_usb_audio_quirk[]) {
> >> + {
> >> + .ifnum = 0,
> >> + .type = QUIRK_AUDIO_FIXED_ENDPOINT,
> >> + .data = &(const struct audioformat) {
> >> + .formats = SNDRV_PCM_FMTBIT_S24_3LE,
> >> + .channels = 8, // outputs
> >> + .iface = 0,
> >> + .altsetting = 1,
> >> + .altset_idx = 1,
> >> + .endpoint = 0x01,
> >> + .ep_attr = USB_ENDPOINT_XFER_ISOC|
> >> + USB_ENDPOINT_SYNC_ASYNC,
> >> + .rates = SNDRV_PCM_RATE_48000,
> >> + .rate_min = 48000,
> >> + .rate_max = 48000,
> >> + .nr_rates = 1,
> >> + .rate_table = (unsigned int[]) { 48000 }
> >> + }
> >> + },
> >> + {
> >> + .ifnum = -1
> >> + }
> >> + }
> >> + }
> >> +},
> >> #undef USB_DEVICE_VENDOR_SPEC
> >>
> > Can anyone review this patch please?
>
> Takashi, could you put this patch to sound-next ? A partial support is
> better than no support.
František, could you resend the patch in a proper format?
The original post couldn't be applied via git-am, as it was
malformed.
Also, please try to adjust the subject line and the changelog text to
be suitable for merging to the tree.
thanks,
Takashi
More information about the Alsa-devel
mailing list