[PATCH AUTOSEL 5.5 29/41] ASoC: stm32: sai: manage rebind issue
Sasha Levin
sashal at kernel.org
Mon Mar 16 03:33:07 CET 2020
From: Olivier Moysan <olivier.moysan at st.com>
[ Upstream commit 0d6defc7e0e437a9fd53622f7fd85740f38d5693 ]
The commit e894efef9ac7 ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional. The following problems have been seen
with STM32 SAI driver.
1) DMA channel is not requested:
With the sound card rebind the simplified call sequence is:
stm32_sai_sub_probe
snd_soc_register_component
snd_soc_try_rebind_card
snd_soc_instantiate_card
devm_snd_dmaengine_pcm_register
The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.
Modify SAI driver, to change the call sequence as follows:
stm32_sai_sub_probe
devm_snd_dmaengine_pcm_register
snd_soc_register_component
snd_soc_try_rebind_card
2) DMA channel is not released:
dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().
devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.
Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SAI driver, to have the right sequence.
Signed-off-by: Olivier Moysan <olivier.moysan at st.com>
Message-Id: <20200304102406.8093-1-olivier.moysan at st.com>
Signed-off-by: Mark Brown <broonie at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
sound/soc/stm/stm32_sai_sub.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index 30bcd5d3a32a8..10eb4b8e8e7ee 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1543,20 +1543,20 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
return ret;
}
- ret = devm_snd_soc_register_component(&pdev->dev, &stm32_component,
- &sai->cpu_dai_drv, 1);
+ ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register pcm dma\n");
+ return ret;
+ }
+
+ ret = snd_soc_register_component(&pdev->dev, &stm32_component,
+ &sai->cpu_dai_drv, 1);
if (ret)
return ret;
if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
conf = &stm32_sai_pcm_config_spdif;
- ret = devm_snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
- if (ret) {
- dev_err(&pdev->dev, "Could not register pcm dma\n");
- return ret;
- }
-
return 0;
}
@@ -1565,6 +1565,8 @@ static int stm32_sai_sub_remove(struct platform_device *pdev)
struct stm32_sai_sub_data *sai = dev_get_drvdata(&pdev->dev);
clk_unprepare(sai->pdata->pclk);
+ snd_dmaengine_pcm_unregister(&pdev->dev);
+ snd_soc_unregister_component(&pdev->dev);
return 0;
}
--
2.20.1
More information about the Alsa-devel
mailing list