[alsa-devel] [PATCH 3/6] ASoC: Intel: common: add match tables for ICL w/ SoundWire

[Pierre-Louis Bossart]

On 3/10/20 5:12 PM, Jaroslav Kysela wrote:
> Dne 10. 01. 20 v 23:25 Pierre-Louis Bossart napsal(a):
>> From: Bard Liao <yung-chuan.liao at linux.intel.com>
>>
>> The two configurations are with the Realtek 3-in-1 board requiring all
>> 4 links to be enabled, or basic configuration with the on-board RT700
>> using link0.
>>
>> Signed-off-by: Bard Liao <yung-chuan.liao at linux.intel.com>
>> Signed-off-by: Pierre-Louis Bossart 
>> <pierre-louis.bossart at linux.intel.com>
> 
> Hi,
> 
>    I just looking to this code and I miss the Kconfig selection for RT 
> codecs in the SOF SDW driver. How we can enable this driver without 
> selecting SND_SOC_ALL_CODECS ?
> 
>    I believe that those changes should be in sync with the machine 
> description.

Sorry Jaroslav, I don't fully understand your question.

These tables are just used to
a) select a firmware file
b) select a topology file
c) select a machine driver.

The codec selections are not made in this module but handled by the 
machine drivers in sound/soc/intel/boards/. It's the same mechanism as 
for all other machine drivers.

One caveat is that the SOF parts and machine drivers for SoundWire have 
not been provided upstream just yet, since they would not build without 
patches in drivers/soundwire. GregKH mentioned the patches are 'sane' 
and provided his Reviewed-by tag. Vinod Koul still has objections to our 
proposals but has yet to make proposals that would work for Intel, so if 
you need SoundWire support in the near-term you will need to have a 
conversation with Vinod. The code is ready and fully-tested.

If you want to look at the machine drivers for SOF+Realtek drivers, see

https://github.com/thesofproject/linux/blob/topic/sof-dev/sound/soc/intel/boards/sdw_rt711_rt1308_rt715.c

and the Kconfig that selects the relevant codec drivers is here:

https://github.com/thesofproject/linux/blob/d05959d5021cefbbd841773ee25f6c7387e6bfd9/sound/soc/intel/boards/Kconfig#L556

Hope this helps
-Pierre