[PATCH 2/7] ASoC: Intel: Skylake: Select hda configuration permissively

[Pierre-Louis Bossart]

On 3/9/20 8:47 AM, Cezary Rojewski wrote:
> On 2020-03-06 21:57, Pierre-Louis Bossart wrote:
>> On 3/5/20 8:53 AM, Cezary Rojewski wrote:
>>> With _reset_link removed from the probe sequence, codec_mask at the time
>>> skl_find_hda_machine() is invoked will always be 0, so hda machine will
>>> never be chosen. Rather than reorganizing boot flow, be permissive about
>>> invalid mask. codec_mask will be set to proper value during probe_work -
>>> before skl_codec_create() ever gets called.
>>
>> humm, what would happen e.g. if you have select the SKL driver but 
>> there is no ACPI information to select an I2S-based machine driver, 
>> and HDaudio/iDISP are disabled? You would have no error checks then?
>>
> 
> Laptops I've been testing this with have had Realtek + iDisp present 
> onboard. Now, if you disable Realtek + HDMI/DP modules within legacy 
> HDaudio Kconfig and HD audio support within Intel Skylake tree then you 
> end up with no required modules for said configuration at all. Nothing 
> will happen really: no warnings, no sound card either.

I meant enable the HDaudio controller but disable HDaudio codecs/HDMI at 
the BIOS level. In that case the codec_mask will never be set.

> Just run such kernel on my setup and results are quite obvious:
> - skl boots
> - no machines present
> - drv stays dormant
> 
> Czarek