[RFC PATCH 3/3] ASoC: Intel: kbl-rt5660: use .exit() dailink callback to release gpiod

[Pierre-Louis Bossart]

The gpiod handling is inspired from the bdw-rt5677 code. Apply same
fix to avoid reference count issue while removing modules for
consistency.

The SOF driver does not yet support this machine driver, and module
load/unload with the SKL driver isn't well supported, so this was not
tested on a device.

Suggested-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
 sound/soc/intel/boards/kbl_rt5660.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/boards/kbl_rt5660.c b/sound/soc/intel/boards/kbl_rt5660.c
index e23dea9ab79a..3ff3afd36536 100644
--- a/sound/soc/intel/boards/kbl_rt5660.c
+++ b/sound/soc/intel/boards/kbl_rt5660.c
@@ -165,8 +165,8 @@ static int kabylake_rt5660_codec_init(struct snd_soc_pcm_runtime *rtd)
 		dev_warn(component->dev, "Failed to add driver gpios\n");
 
 	/* Request rt5660 GPIO for lineout mute control, return if fails */
-	ctx->gpio_lo_mute = devm_gpiod_get(component->dev, "lineout-mute",
-					   GPIOD_OUT_HIGH);
+	ctx->gpio_lo_mute = gpiod_get(component->dev, "lineout-mute",
+				      GPIOD_OUT_HIGH);
 	if (IS_ERR(ctx->gpio_lo_mute)) {
 		dev_err(component->dev, "Can't find GPIO_MUTE# gpio\n");
 		return PTR_ERR(ctx->gpio_lo_mute);
@@ -207,6 +207,14 @@ static int kabylake_rt5660_codec_init(struct snd_soc_pcm_runtime *rtd)
 	return 0;
 }
 
+static void kabylake_rt5660_codec_exit(struct snd_soc_pcm_runtime *rtd)
+{
+	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
+
+	if (!IS_ERR(ctx->gpio_lo_mute))
+		gpiod_put(ctx->gpio_lo_mute));
+}
+
 static int kabylake_hdmi_init(struct snd_soc_pcm_runtime *rtd, int device)
 {
 	struct kbl_codec_private *ctx = snd_soc_card_get_drvdata(rtd->card);
@@ -421,6 +429,7 @@ static struct snd_soc_dai_link kabylake_rt5660_dais[] = {
 		.id = 0,
 		.no_pcm = 1,
 		.init = kabylake_rt5660_codec_init,
+		.exit = kabylake_rt5660_codec_exit,
 		.dai_fmt = SND_SOC_DAIFMT_I2S |
 		SND_SOC_DAIFMT_NB_NF |
 		SND_SOC_DAIFMT_CBS_CFS,
-- 
2.20.1