[PATCH 2/2] ALSA: usb-audio: Replace s/frame/packet/ where appropriate

[Alexander Tsoy]

Replace several occurences of "frame" with a "packet" where appropriate.

Signed-off-by: Alexander Tsoy <alexander at tsoy.me>
---
 sound/usb/card.h     |  6 +++---
 sound/usb/endpoint.c | 19 +++++++++----------
 2 files changed, 12 insertions(+), 13 deletions(-)

diff --git a/sound/usb/card.h b/sound/usb/card.h
index d6219fba9699..de43267b9c8a 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -84,10 +84,10 @@ struct snd_usb_endpoint {
 	dma_addr_t sync_dma;		/* DMA address of syncbuf */
 
 	unsigned int pipe;		/* the data i/o pipe */
-	unsigned int framesize[2];	/* small/large frame sizes in samples */
-	unsigned int sample_rem;	/* remainder from division fs/fps */
+	unsigned int packsize[2];	/* small/large packet sizes in samples */
+	unsigned int sample_rem;	/* remainder from division fs/pps */
 	unsigned int sample_accum;	/* sample accumulator */
-	unsigned int fps;		/* frames per second */
+	unsigned int pps;		/* packets per second */
 	unsigned int freqn;		/* nominal sampling rate in fs/fps in Q16.16 format */
 	unsigned int freqm;		/* momentary sampling rate in fs/fps in Q16.16 format */
 	int	   freqshift;		/* how much to shift the feedback value to get Q16.16 */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 11f23778f0a5..88760268fb55 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -159,11 +159,11 @@ int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
 		return ep->maxframesize;
 
 	ep->sample_accum += ep->sample_rem;
-	if (ep->sample_accum >= ep->fps) {
-		ep->sample_accum -= ep->fps;
-		ret = ep->framesize[1];
+	if (ep->sample_accum >= ep->pps) {
+		ep->sample_accum -= ep->pps;
+		ret = ep->packsize[1];
 	} else {
-		ret = ep->framesize[0];
+		ret = ep->packsize[0];
 	}
 
 	return ret;
@@ -1088,16 +1088,15 @@ int snd_usb_endpoint_set_params(struct snd_usb_endpoint *ep,
 
 	if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) {
 		ep->freqn = get_usb_full_speed_rate(rate);
-		ep->fps = 1000;
+		ep->pps = 1000 >> ep->datainterval;
 	} else {
 		ep->freqn = get_usb_high_speed_rate(rate);
-		ep->fps = 8000;
+		ep->pps = 8000 >> ep->datainterval;
 	}
-	ep->fps >>= ep->datainterval;
 
-	ep->sample_rem = rate % ep->fps;
-	ep->framesize[0] = rate / ep->fps;
-	ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps;
+	ep->sample_rem = rate % ep->pps;
+	ep->packsize[0] = rate / ep->pps;
+	ep->packsize[1] = (rate + (ep->pps - 1)) / ep->pps;
 
 	/* calculate the frequency in 16.16 format */
 	ep->freqm = ep->freqn;
-- 
2.26.2