[PATCH 10/13] ALSA: hda/conexant: Use the new vmaster mute LED helper
Takashi Iwai
tiwai at suse.de
Thu Jun 18 13:08:39 CEST 2020
Convert the mute LED handling in Conexant codec to the new vmaster
mute helper. A point to be cautiously handled is that the value
passed to the callback is inverted; the vmaster passes "enabled"
(0 = mute), while LED classdev passes "brightness" (1 = mute).
Also the assignment of the default vmaster hook is moved at a later
point after the mute hook is set up. This assures no nested hook.
Finally, since we enable the mute-LED kcontrols always in the helper
side, the extra vmaster_mute_enum flag set up is dropped.
Tested-by: Kai-Heng Feng <kai.heng.feng at canonical.com>
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
sound/pci/hda/patch_conexant.c | 37 +++++++++++++++----------------------
1 file changed, 15 insertions(+), 22 deletions(-)
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 5a7c16e39d7a..d796963b80d7 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -137,14 +137,16 @@ static void cx_auto_vmaster_hook(void *private_data, int enabled)
}
/* turn on/off EAPD according to Master switch (inversely!) for mute LED */
-static void cx_auto_vmaster_hook_mute_led(void *private_data, int enabled)
+static int cx_auto_vmaster_mute_led(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
{
- struct hda_codec *codec = private_data;
+ struct hda_codec *codec = dev_to_hda_codec(led_cdev->dev->parent);
struct conexant_spec *spec = codec->spec;
snd_hda_codec_write(codec, spec->mute_led_eapd, 0,
AC_VERB_SET_EAPD_BTLENABLE,
- enabled ? 0x00 : 0x02);
+ brightness ? 0x02 : 0x00);
+ return 0;
}
static int cx_auto_init(struct hda_codec *codec)
@@ -566,7 +568,7 @@ static void cxt_fixup_mute_led_eapd(struct hda_codec *codec,
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
spec->mute_led_eapd = 0x1b;
spec->dynamic_eapd = 1;
- spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook_mute_led;
+ snd_hda_gen_add_mute_led_cdev(codec, cx_auto_vmaster_mute_led);
}
}
@@ -631,12 +633,14 @@ static void cxt_update_gpio_led(struct hda_codec *codec, unsigned int mask,
}
/* turn on/off mute LED via GPIO per vmaster hook */
-static void cxt_fixup_gpio_mute_hook(void *private_data, int enabled)
+static int cxt_gpio_mute_update(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
{
- struct hda_codec *codec = private_data;
+ struct hda_codec *codec = dev_to_hda_codec(led_cdev->dev->parent);
struct conexant_spec *spec = codec->spec;
- /* muted -> LED on */
- cxt_update_gpio_led(codec, spec->gpio_mute_led_mask, !enabled);
+
+ cxt_update_gpio_led(codec, spec->gpio_mute_led_mask, brightness);
+ return 0;
}
/* turn on/off mic-mute LED via GPIO per capture hook */
@@ -662,7 +666,7 @@ static void cxt_fixup_mute_led_gpio(struct hda_codec *codec,
};
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
- spec->gen.vmaster_mute.hook = cxt_fixup_gpio_mute_hook;
+ snd_hda_gen_add_mute_led_cdev(codec, cxt_gpio_mute_update);
spec->gpio_led = 0;
spec->mute_led_polarity = 0;
spec->gpio_mute_led_mask = 0x01;
@@ -990,8 +994,6 @@ static int patch_conexant_auto(struct hda_codec *codec)
cx_auto_parse_eapd(codec);
spec->gen.own_eapd_ctl = 1;
- if (spec->dynamic_eapd)
- spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook;
switch (codec->core.vendor_id) {
case 0x14f15045:
@@ -1024,17 +1026,8 @@ static int patch_conexant_auto(struct hda_codec *codec)
break;
}
- /* Show mute-led control only on HP laptops
- * This is a sort of white-list: on HP laptops, EAPD corresponds
- * only to the mute-LED without actualy amp function. Meanwhile,
- * others may use EAPD really as an amp switch, so it might be
- * not good to expose it blindly.
- */
- switch (codec->core.subsystem_id >> 16) {
- case 0x103c:
- spec->gen.vmaster_mute_enum = 1;
- break;
- }
+ if (!spec->gen.vmaster_mute.hook && spec->dynamic_eapd)
+ spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
--
2.16.4
More information about the Alsa-devel
mailing list