[PATCH 1/3] ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_H
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Wed Jun 17 18:47:53 CEST 2020
We already have two configurations for CometLake, and a third one
coming. On other platforms, we used a single Kconfig option, so we
should follow the same trend by merging the two cases in a backwards
compatible way.
The backwards compatibility is handled by overloading the COMETLAKE_LP
kconfig as COMETLAKE. In practice we've never seen a case where
COMETLAKE_H is not selected along with COMETLAKE_LP, so keeping one
of the two is enough.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski at linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen at linux.intel.com>
---
sound/hda/intel-dsp-config.c | 4 +---
sound/soc/intel/boards/Kconfig | 4 ++--
sound/soc/sof/intel/Kconfig | 29 ++++++++---------------------
sound/soc/sof/sof-pci-dev.c | 12 ++++--------
4 files changed, 15 insertions(+), 34 deletions(-)
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
index 20b8f6cb3ff8..99aec7349167 100644
--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -208,8 +208,8 @@ static const struct config_entry config_table[] = {
},
#endif
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE)
/* Cometlake-LP */
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_LP)
{
.flags = FLAG_SOF,
.device = 0x02c8,
@@ -240,9 +240,7 @@ static const struct config_entry config_table[] = {
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = 0x02c8,
},
-#endif
/* Cometlake-H */
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H)
{
.flags = FLAG_SOF,
.device = 0x06c8,
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index a2a5798c9139..5dc489a79454 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -492,7 +492,7 @@ config SND_SOC_INTEL_SOF_PCM512x_MACH
endif ## SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL
-if (SND_SOC_SOF_COMETLAKE_LP && SND_SOC_SOF_HDA_LINK)
+if (SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK)
config SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH
tristate "CML_LP with DA7219 and MAX98357A in I2S Mode"
@@ -520,7 +520,7 @@ config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH
Say Y if you have such a device.
If unsure select "N".
-endif ## SND_SOC_SOF_COMETLAKE_LP && SND_SOC_SOF_HDA_LINK
+endif ## SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK
if SND_SOC_SOF_JASPERLAKE
diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig
index c9a2bee4b55c..3aaf25e4f766 100644
--- a/sound/soc/sof/intel/Kconfig
+++ b/sound/soc/sof/intel/Kconfig
@@ -25,8 +25,7 @@ config SND_SOC_SOF_INTEL_PCI
select SND_SOC_SOF_CANNONLAKE if SND_SOC_SOF_CANNONLAKE_SUPPORT
select SND_SOC_SOF_COFFEELAKE if SND_SOC_SOF_COFFEELAKE_SUPPORT
select SND_SOC_SOF_ICELAKE if SND_SOC_SOF_ICELAKE_SUPPORT
- select SND_SOC_SOF_COMETLAKE_LP if SND_SOC_SOF_COMETLAKE_LP_SUPPORT
- select SND_SOC_SOF_COMETLAKE_H if SND_SOC_SOF_COMETLAKE_H_SUPPORT
+ select SND_SOC_SOF_COMETLAKE if SND_SOC_SOF_COMETLAKE_SUPPORT
select SND_SOC_SOF_TIGERLAKE if SND_SOC_SOF_TIGERLAKE_SUPPORT
select SND_SOC_SOF_ELKHARTLAKE if SND_SOC_SOF_ELKHARTLAKE_SUPPORT
select SND_SOC_SOF_JASPERLAKE if SND_SOC_SOF_JASPERLAKE_SUPPORT
@@ -201,34 +200,22 @@ config SND_SOC_SOF_ICELAKE
This option is not user-selectable but automagically handled by
'select' statements at a higher level
-config SND_SOC_SOF_COMETLAKE_LP
+config SND_SOC_SOF_COMETLAKE
tristate
select SND_SOC_SOF_HDA_COMMON
help
This option is not user-selectable but automagically handled by
'select' statements at a higher level
-config SND_SOC_SOF_COMETLAKE_LP_SUPPORT
- bool "SOF support for CometLake-LP"
- help
- This adds support for Sound Open Firmware for Intel(R) platforms
- using the Cometlake-LP processors.
- Say Y if you have such a device.
- If unsure select "N".
+config SND_SOC_SOF_COMETLAKE_SUPPORT
+ bool
-config SND_SOC_SOF_COMETLAKE_H
- tristate
- select SND_SOC_SOF_HDA_COMMON
- help
- This option is not user-selectable but automagically handled by
- 'select' statements at a higher level
-
-config SND_SOC_SOF_COMETLAKE_H_SUPPORT
- bool "SOF support for CometLake-H"
+config SND_SOC_SOF_COMETLAKE_LP_SUPPORT
+ bool "SOF support for CometLake"
+ select SND_SOC_SOF_COMETLAKE_SUPPORT
help
This adds support for Sound Open Firmware for Intel(R) platforms
- using the Cometlake-H processors.
- Say Y if you have such a device.
+ using the Cometlake processors.
If unsure select "N".
config SND_SOC_SOF_TIGERLAKE_SUPPORT
diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index b13697dab7c0..7b5f6e17b05f 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -151,9 +151,7 @@ static const struct sof_dev_desc cfl_desc = {
};
#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_LP) || \
- IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H)
-
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE)
static const struct sof_dev_desc cml_desc = {
.machines = snd_soc_acpi_intel_cml_machines,
.alt_machines = snd_soc_acpi_intel_cml_sdw_machines,
@@ -420,12 +418,10 @@ static const struct pci_device_id sof_pci_ids[] = {
{ PCI_DEVICE(0x8086, 0x4dc8),
.driver_data = (unsigned long)&jsl_desc},
#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_LP)
- { PCI_DEVICE(0x8086, 0x02c8),
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE)
+ { PCI_DEVICE(0x8086, 0x02c8), /* CML-LP */
.driver_data = (unsigned long)&cml_desc},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_COMETLAKE_H)
- { PCI_DEVICE(0x8086, 0x06c8),
+ { PCI_DEVICE(0x8086, 0x06c8), /* CML-H */
.driver_data = (unsigned long)&cml_desc},
#endif
#if IS_ENABLED(CONFIG_SND_SOC_SOF_TIGERLAKE)
--
2.20.1
More information about the Alsa-devel
mailing list