[PATCH 03/16] ASoC: pxa: rename to snd_soc_component_read()

[Kuninori Morimoto]

From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

We need to use snd_soc_component_read()
instead of     snd_soc_component_read32()

This patch renames _read32() to _read()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
 sound/soc/pxa/mioa701_wm9713.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c
index bf27b277c01f..763db7bbd9bb 100644
--- a/sound/soc/pxa/mioa701_wm9713.c
+++ b/sound/soc/pxa/mioa701_wm9713.c
@@ -51,14 +51,14 @@ static int rear_amp_power(struct snd_soc_component *component, int power)
 	unsigned short reg;
 
 	if (power) {
-		reg = snd_soc_component_read32(component, AC97_GPIO_CFG);
+		reg = snd_soc_component_read(component, AC97_GPIO_CFG);
 		snd_soc_component_write(component, AC97_GPIO_CFG, reg | 0x0100);
-		reg = snd_soc_component_read32(component, AC97_GPIO_PULL);
+		reg = snd_soc_component_read(component, AC97_GPIO_PULL);
 		snd_soc_component_write(component, AC97_GPIO_PULL, reg | (1<<15));
 	} else {
-		reg = snd_soc_component_read32(component, AC97_GPIO_CFG);
+		reg = snd_soc_component_read(component, AC97_GPIO_CFG);
 		snd_soc_component_write(component, AC97_GPIO_CFG, reg & ~0x0100);
-		reg = snd_soc_component_read32(component, AC97_GPIO_PULL);
+		reg = snd_soc_component_read(component, AC97_GPIO_PULL);
 		snd_soc_component_write(component, AC97_GPIO_PULL, reg & ~(1<<15));
 	}
 
-- 
2.25.1