[RFC PATCH 1/2] dt-bindings: tas2562: Add firmware support for tas2563

[Dan Murphy]

Mark

On 6/9/20 12:31 PM, Mark Brown wrote:
> On Tue, Jun 09, 2020 at 12:28:40PM -0500, Dan Murphy wrote:
>> Add a property called firmware-name that will be the name of the
>> firmware that will reside in the file system or built into the kernel.
> Why not just use a standard name for the firmware?  If the firmwares
> vary per-board then building it using the machine compatible (or DMI
> info) could handle that, with a fallback to a standard name for a
> default setup.

The number of firmwares can vary per IC on the board itself.  So you may 
have X number of firmware files all with different names all targets for 
different TAS2563 ICs.

Also TI will not be providing the individual binaries to the customer.  
There is a customer tool that the user uses to create the binaries.

So the output names are arbitrary.

I was going to mention this in the cover letter but did not think 
mentioning the user tool had any value

Dan