[PATCH v3 8/8] dt-bindings: sound: lpass-cpu: Move to yaml format
Rohit Kumar
rohitkr at codeaurora.org
Wed Jul 22 12:44:29 CEST 2020
Thanks Rob for the review. Posted v4 with fixes.
On 7/14/2020 4:23 AM, Rob Herring wrote:
> On Wed, Jul 08, 2020 at 10:38:16AM +0530, Rohit kumar wrote:
>> From: Ajit Pandey <ajitp at codeaurora.org>
>>
>> Update lpass-cpu binding with yaml formats.
>>
>> Signed-off-by: Ajit Pandey <ajitp at codeaurora.org>
>> Signed-off-by: Rohit kumar <rohitkr at codeaurora.org>
>> ---
>> .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 80 -----------
>> .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 154 +++++++++++++++++++++
>> 2 files changed, 154 insertions(+), 80 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>> create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>> deleted file mode 100644
>> index 04e34cc..00000000
>> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>> +++ /dev/null
>> @@ -1,80 +0,0 @@
>> -* Qualcomm Technologies LPASS CPU DAI
>> -
>> -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
>> -
>> -Required properties:
>> -
>> -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
>> - "qcom,lpass-cpu-sc7180"
>> -- clocks : Must contain an entry for each entry in clock-names.
>> -- clock-names : A list which must include the following entries:
>> - * "ahbix-clk"
>> - * "mi2s-osr-clk"
>> - * "mi2s-bit-clk"
>> - : required clocks for "qcom,lpass-cpu-apq8016"
>> - * "ahbix-clk"
>> - * "mi2s-bit-clk0"
>> - * "mi2s-bit-clk1"
>> - * "mi2s-bit-clk2"
>> - * "mi2s-bit-clk3"
>> - * "pcnoc-mport-clk"
>> - * "pcnoc-sway-clk"
>> -
>> -- interrupts : Must contain an entry for each entry in
>> - interrupt-names.
>> -- interrupt-names : A list which must include the following entries:
>> - * "lpass-irq-lpaif"
>> -- pinctrl-N : One property must exist for each entry in
>> - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
>> - for details of the property values.
>> -- pinctrl-names : Must contain a "default" entry.
>> -- reg : Must contain an address for each entry in reg-names.
>> -- reg-names : A list which must include the following entries:
>> - * "lpass-lpaif"
>> -- #address-cells : Must be 1
>> -- #size-cells : Must be 0
>> -
>> -
>> -
>> -Optional properties:
>> -
>> -- qcom,adsp : Phandle for the audio DSP node
>> -
>> -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
>> -The SD lines to use can be configured by adding subnodes for each of the DAIs.
>> -
>> -Required properties for each DAI (represented by a subnode):
>> -- reg : Must be one of the DAI IDs
>> - (usually part of dt-bindings header)
>> -- qcom,playback-sd-lines: List of serial data lines to use for playback
>> - Each SD line should be represented by a number from 0-3.
>> -- qcom,capture-sd-lines : List of serial data lines to use for capture
>> - Each SD line should be represented by a number from 0-3.
>> -
>> -Note that adding a subnode changes the default to "no lines configured",
>> -so both playback and capture lines should be configured when a subnode is added.
>> -
>> -Example:
>> -
>> -lpass at 28100000 {
>> - compatible = "qcom,lpass-cpu";
>> - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
>> - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
>> - interrupts = <0 85 1>;
>> - interrupt-names = "lpass-irq-lpaif";
>> - pinctrl-names = "default", "idle";
>> - pinctrl-0 = <&mi2s_default>;
>> - pinctrl-1 = <&mi2s_idle>;
>> - reg = <0x28100000 0x10000>;
>> - reg-names = "lpass-lpaif";
>> - qcom,adsp = <&adsp>;
>> -
>> - #address-cells = <1>;
>> - #size-cells = <0>;
>> -
>> - /* Optional to set different MI2S SD lines */
>> - dai at 3 {
>> - reg = <MI2S_QUATERNARY>;
>> - qcom,playback-sd-lines = <0 1>;
>> - };
>> -};
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>> new file mode 100644
>> index 00000000..9c350bc
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>> @@ -0,0 +1,154 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm LPASS CPU dai driver bindings
>> +
>> +maintainers:
>> + - Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>> + - Rohit kumar <rohitkr at codeaurora.org>
>> +
>> +description:
>> + Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface
>> + for audio data transfer on external codecs. LPASS cpu driver is a module to
>> + configure Low-Power Audio Interface(LPAIF) core registers across different
>> + IP versions.
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - qcom,lpass-cpu
>> + - qcom,apq8016-lpass-cpu
>> + - qcom,lpass-cpu-sc7180
>> +
>> + reg:
>> + items:
>> + - description: LPAIF core registers
> Just: 'maxItems: 1' for a single entry.
pl
>
>> +
>> + reg-names:
>> + items:
>> + - const: lpass-lpaif
> Not all that useful with only 1.
ok .. Removed in v4.
>
>> +
>> + clocks:
>> + items:
>> + - description: AHBIX core clock
>> + - description: oscillator clock for MI2S external interfaces
>> + - description: Bit clock for single MI2S dai
>> + - description: Bit clock for MI2S_PRIMARY dai interface
>> + - description: Bit clock for MI2S_SECONDARY dai interface
>> + - description: Bit clock for MI2S_TERTIARY dai interface
>> + - description: Bit clock for MI2S_QUATERNARY dai interface
>> + - description: NOC MPORT clock of LPASS core
>> + - description: NOC SWAY clock of LPASS core
>> +
>> + clock-names:
>> + items:
>> + - const: ahbix-clk
>> + - const: mi2s-osr-clk
>> + - const: mi2s-bit-clk
>> + - const: mi2s-bit-clk0
>> + - const: mi2s-bit-clk1
>> + - const: mi2s-bit-clk2
>> + - const: mi2s-bit-clk3
>> + - const: pcnoc-mport-clk
>> + - const: pcnoc-sway-clk
>> +
>> + interrupts:
>> + items:
>> + - description: LPAIF DMA buffer interrupt
> maxItems: 1
ok
>
>> +
>> + interrupt-names:
>> + items:
>> + - const: lpass-irq-lpaif
>> +
>> + qcom,adsp:
>> + maxItems: 1
>> + description: Phandle for the audio DSP node
> Needs a type $ref. And if just a phandle, 'maxItems: 1' is not
> appropriate.
>
>> +
>> + iommus:
>> + maxItems: 1
>> + description: Phandle to apps_smmu node with sid mask
>> +
>> + power-domains:
>> + maxItems: 1
>> + description: Phandle for power domain node
> Drop. That's every 'power-domains' property.
ok
>> +
>> + '#sound-dai-cells':
>> + const: 1
>> +
>> + child-node:
> I'm sure I said this on some review recently, but you are defining a
> child node named 'child-node'. You need this under patternProperties
> with the actual child node name.
Done in v4.
>
>> + description: Required properties for each DAI
>> + type: object
>> + properties:
>> + reg:
>> + description: Must be one of the DAI ID
>> + (Usually part of dtbindings header)
> Ideally, you'd define the range of values here.
>
>> + qcom,playback-sd-lines:
>> + description: List of serial data lines to use for playback
>> + Each SD line should be represented by a number from 0-3.
> Needs a type $ref and 0-3 should be expressed as a schema.
>
> 'make dt_binding_check' should complain about this. You did run that,
> right?
Actually I reposted the Ajit's patch. Fixed all issues in v4.
>> + qcom,capture-sd-lines :
>> + description: List of serial data lines to use for capture
>> + Each SD line should be represented by a number from 0-3.
> ditto
>
>> + required:
>> + -reg
> space ^
>
>> + # Note that adding a subnode changes the default to "no lines configured",
>> + # so both playback and capture lines should be configured when a subnode
>> + # is added.
>> +
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - reg-names
>> + - clocks
>> + - clock-names
>> + - interrupts
>> + - interrupt-names
>> + - sound-dai-cells
> Not a valid property.
>
>> +
>> +optional:
>> + - qcom,adsp
>> +
>> +if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: qcom,lpass-cpu-sc7180
>> +
>> +then:
>> + required:
>> + - iommus
>> + - power-domains
>> +
>> +examples:
>> + lpass at 28100000 {
> This is not valid. 'examples' should be a list.
>
>> + compatible = "qcom,lpass-cpu";
>> + clocks = <&lcc AHBIX_CLK>,
>> + <&lcc MI2S_OSR_CLK>,
>> + <&lcc MI2S_BIT_CLK>;
> The example will not build because the includes are missing.
>
>> +
>> + clock-names = "ahbix-clk",
>> + "mi2s-osr-clk",
>> + "mi2s-bit-clk";
>> +
>> + interrupts = <0 85 1>;
>> + interrupt-names = "lpass-irq-lpaif";
>> +
>> + iommus = <&apps_smmu 0x1020 0>;
>> + power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
>> +
>> + reg = <0x28100000 0x10000>;
>> + reg-names = "lpass-lpaif";
>> + #sound-dai-cells = <1>;
>> + qcom,adsp = <&adsp>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + /* Optional to set different MI2S SD lines */
>> + mi2s-quaternary at 3 {
>> + reg = <MI2S_QUATERNARY>;
>> + qcom,playback-sd-lines = <0 1>;
>> + };
>> --
>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
>> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Thanks,
Rohit
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
More information about the Alsa-devel
mailing list