[PATCH v2 8/9] ASoC: qdsp6-dai: add gapless support
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Wed Jul 22 11:00:06 CEST 2020
Thanks Pierre for quick review!
On 21/07/2020 20:53, Pierre-Louis Bossart wrote:
>
>
>
>
>> case ASM_CLIENT_EVENT_CMD_EOS_DONE:
>> - prtd->state = Q6ASM_STREAM_STOPPED;
>> + spin_lock_irqsave(&prtd->lock, flags);
>> + if (prtd->notify_on_drain) {
>> + if (substream->partial_drain) {
>> + /**
>
> why the kernel-doc style comment?
>
Nothing intentional, will fix this!
> [...]
>
>> -static int q6asm_dai_compr_set_params(struct snd_soc_component
>> *component,
>> - struct snd_compr_stream *stream,
>> - struct snd_compr_params *params)
>> +static int __q6asm_dai_compr_set_codec_params(struct
>> snd_soc_component *component,
>> + struct snd_compr_stream *stream,
>> + struct snd_codec *codec,
>> + int stream_id)
>
> not sure I get why you added the __ prefix, does it have any semantic
> meaning?
Nope, just to mark them it as internal function, as the function name is
very much similar to q6asm_dai_compr_set_params() callback!
I will try to come up with better naming and also move the indirection
changes to a separate patch!
>
>> {
>> struct snd_compr_runtime *runtime = stream->runtime;
>> struct q6asm_dai_rtd *prtd = runtime->private_data;
>> - struct snd_soc_pcm_runtime *rtd = stream->private_data;
>> - int dir = stream->direction;
>> - struct q6asm_dai_data *pdata;
>> struct q6asm_flac_cfg flac_cfg;
>> struct q6asm_wma_cfg wma_cfg;
>> struct q6asm_alac_cfg alac_cfg;
>> @@ -667,53 +718,18 @@ static int q6asm_dai_compr_set_params(struct
>> snd_soc_component *component,
>> struct snd_dec_alac *alac;
>> struct snd_dec_ape *ape;
>> - codec_options = &(prtd->codec_param.codec.options);
>> -
>> -
>> - memcpy(&prtd->codec_param, params, sizeof(*params));
>> -
>> - pdata = snd_soc_component_get_drvdata(component);
>> - if (!pdata)
>> - return -EINVAL;
>> -
>> - if (!prtd || !prtd->audio_client) {
>> - dev_err(dev, "private data null or audio client freed\n");
>> - return -EINVAL;
>> - }
>> -
>> - prtd->periods = runtime->fragments;
>> - prtd->pcm_count = runtime->fragment_size;
>> - prtd->pcm_size = runtime->fragments * runtime->fragment_size;
>> - prtd->bits_per_sample = 16;
>> - if (dir == SND_COMPRESS_PLAYBACK) {
>> - ret = q6asm_open_write(prtd->audio_client, prtd->stream_id,
>> - params->codec.id, params->codec.profile,
>> - prtd->bits_per_sample, true);
>> -
>> - if (ret < 0) {
>> - dev_err(dev, "q6asm_open_write failed\n");
>> - q6asm_audio_client_free(prtd->audio_client);
>> - prtd->audio_client = NULL;
>> - return ret;
>> - }
>> - }
>> + codec_options = &(prtd->codec.options);
>> - prtd->session_id = q6asm_get_session_id(prtd->audio_client);
>> - ret = q6routing_stream_open(rtd->dai_link->id, LEGACY_PCM_MODE,
>> - prtd->session_id, dir);
>> - if (ret) {
>> - dev_err(dev, "Stream reg failed ret:%d\n", ret);
>> - return ret;
>> - }
>> + memcpy(&prtd->codec, codec, sizeof(*codec));
>> - switch (params->codec.id) {
>> + switch (codec->id) {
>> case SND_AUDIOCODEC_FLAC:
>> memset(&flac_cfg, 0x0, sizeof(struct q6asm_flac_cfg));
>> flac = &codec_options->flac_d;
>> - flac_cfg.ch_cfg = params->codec.ch_in;
>> - flac_cfg.sample_rate = params->codec.sample_rate;
>
> all these indirection changes could have gone in a earlier patch, this
> adds a lot of changes that make this patch long to review. Same comment
> for all formats
>
>> + flac_cfg.ch_cfg = codec->ch_in;
>> + flac_cfg.sample_rate = codec->sample_rate;
>> flac_cfg.stream_info_present = 1;
>> flac_cfg.sample_size = flac->sample_size;
>> flac_cfg.min_blk_size = flac->min_blk_size;
>
> [...]
>
...
>> @@ -917,6 +1018,14 @@ static int q6asm_dai_compr_trigger(struct
>> snd_soc_component *component,
>> ret = q6asm_cmd_nowait(prtd->audio_client, prtd->stream_id,
>> CMD_PAUSE);
>> break;
>> + case SND_COMPR_TRIGGER_NEXT_TRACK:
>> + prtd->next_track = true;
>> + prtd->next_track_stream_id = (prtd->stream_id == 1 ? 2 : 1);
>
> it's rather odd, the initialization above uses next_track_stream_id = 0?
Vaild stream ids start from 1, So we are toggling this between 1 and 2.
So when we set next_track_stream_id to 0, that means we have opened the
new next stream id and is set to prtd->stream_id. This logic is to
ensure that we are not going to open next stream id twice!
>
>> + break;
>> + case SND_COMPR_TRIGGER_DRAIN:
>> + case SND_COMPR_TRIGGER_PARTIAL_DRAIN:
>> + prtd->notify_on_drain = true;
>> + break;
>> default:
>> ret = -EINVAL;
>> break;
>> diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h
>> index 69513ac1fa55..a8dddfeb28da 100644
>> --- a/sound/soc/qcom/qdsp6/q6asm.h
>> +++ b/sound/soc/qcom/qdsp6/q6asm.h
>> @@ -34,6 +34,7 @@ enum {
>> #define MAX_SESSIONS 8
>> #define NO_TIMESTAMP 0xFF00
>> #define FORMAT_LINEAR_PCM 0x0000
>> +#define ASM_LAST_BUFFER_FLAG BIT(30)
>> struct q6asm_flac_cfg {
>> u32 sample_rate;
>>
More information about the Alsa-devel
mailing list