[alsa-devel] [PATCH 2/9] ASoC: SOF: pm: Unify suspend/resume routines
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Wed Jan 29 23:07:19 CET 2020
From: Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
Unify the suspend/resume routines for both the D0I3/D3
DSP targets in sof_suspend()/sof_resume().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
sound/soc/sof/pm.c | 91 ++++++++++++++++++++--------------------------
1 file changed, 39 insertions(+), 52 deletions(-)
diff --git a/sound/soc/sof/pm.c b/sound/soc/sof/pm.c
index a0cde053b61a..5b186bceedb9 100644
--- a/sound/soc/sof/pm.c
+++ b/sound/soc/sof/pm.c
@@ -50,6 +50,7 @@ static void sof_cache_debugfs(struct snd_sof_dev *sdev)
static int sof_resume(struct device *dev, bool runtime_resume)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+ enum sof_d0_substate old_d0_substate = sdev->d0_substate;
int ret;
/* do nothing if dsp resume callbacks are not set */
@@ -60,6 +61,17 @@ static int sof_resume(struct device *dev, bool runtime_resume)
if (sdev->first_boot)
return 0;
+ /* resume from D0I3 */
+ if (!runtime_resume && old_d0_substate == SOF_DSP_D0I3) {
+ ret = snd_sof_set_d0_substate(sdev, SOF_DSP_D0I0);
+ if (ret < 0 && ret != -ENOTSUPP) {
+ dev_err(sdev->dev,
+ "error: failed to resume from D0I3 %d\n",
+ ret);
+ return ret;
+ }
+ }
+
/*
* if the runtime_resume flag is set, call the runtime_resume routine
* or else call the system resume routine
@@ -74,6 +86,10 @@ static int sof_resume(struct device *dev, bool runtime_resume)
return ret;
}
+ /* Nothing further to do if resuming from D0I3 */
+ if (!runtime_resume && old_d0_substate == SOF_DSP_D0I3)
+ return 0;
+
sdev->fw_state = SOF_FW_BOOT_PREPARE;
/* load the firmware */
@@ -140,10 +156,7 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
return 0;
if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
- goto power_down;
-
- /* release trace */
- snd_sof_release_trace(sdev);
+ goto suspend;
/* set restore_stream for all streams during system suspend */
if (!runtime_suspend) {
@@ -156,6 +169,22 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
}
}
+ if (snd_sof_dsp_d0i3_on_suspend(sdev)) {
+ /* suspend to D0i3 */
+ ret = snd_sof_set_d0_substate(sdev, SOF_DSP_D0I3);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: failed to enter D0I3, %d\n",
+ ret);
+ return ret;
+ }
+
+ /* Skip to platform-specific suspend if DSP is entering D0I3 */
+ goto suspend;
+ }
+
+ /* release trace */
+ snd_sof_release_trace(sdev);
+
#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
/* cache debugfs contents during runtime suspend */
if (runtime_suspend)
@@ -179,13 +208,13 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
ret);
}
-power_down:
+suspend:
/* return if the DSP was not probed successfully */
if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
return 0;
- /* power down all DSP cores */
+ /* platform-specific suspend */
if (runtime_suspend)
ret = snd_sof_dsp_runtime_suspend(sdev);
else
@@ -195,6 +224,10 @@ static int sof_suspend(struct device *dev, bool runtime_suspend)
"error: failed to power down DSP during suspend %d\n",
ret);
+ /* Do not reset FW state if DSP is in D0I3 */
+ if (sdev->d0_substate == SOF_DSP_D0I3)
+ return ret;
+
/* reset FW state */
sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
@@ -275,58 +308,12 @@ EXPORT_SYMBOL(snd_sof_set_d0_substate);
int snd_sof_resume(struct device *dev)
{
- struct snd_sof_dev *sdev = dev_get_drvdata(dev);
- int ret;
-
- if (snd_sof_dsp_d0i3_on_suspend(sdev)) {
- /* resume from D0I3 */
- dev_dbg(sdev->dev, "DSP will exit from D0i3...\n");
- ret = snd_sof_set_d0_substate(sdev, SOF_DSP_D0I0);
- if (ret == -ENOTSUPP) {
- /* fallback to resume from D3 */
- dev_dbg(sdev->dev, "D0i3 not supported, fall back to resume from D3...\n");
- goto d3_resume;
- } else if (ret < 0) {
- dev_err(sdev->dev, "error: failed to exit from D0I3 %d\n",
- ret);
- return ret;
- }
-
- /* platform-specific resume from D0i3 */
- return snd_sof_dsp_resume(sdev);
- }
-
-d3_resume:
- /* resume from D3 */
return sof_resume(dev, false);
}
EXPORT_SYMBOL(snd_sof_resume);
int snd_sof_suspend(struct device *dev)
{
- struct snd_sof_dev *sdev = dev_get_drvdata(dev);
- int ret;
-
- if (snd_sof_dsp_d0i3_on_suspend(sdev)) {
- /* suspend to D0i3 */
- dev_dbg(sdev->dev, "DSP is trying to enter D0i3...\n");
- ret = snd_sof_set_d0_substate(sdev, SOF_DSP_D0I3);
- if (ret == -ENOTSUPP) {
- /* fallback to D3 suspend */
- dev_dbg(sdev->dev, "D0i3 not supported, fall back to D3...\n");
- goto d3_suspend;
- } else if (ret < 0) {
- dev_err(sdev->dev, "error: failed to enter D0I3, %d\n",
- ret);
- return ret;
- }
-
- /* platform-specific suspend to D0i3 */
- return snd_sof_dsp_suspend(sdev);
- }
-
-d3_suspend:
- /* suspend to D3 */
return sof_suspend(dev, false);
}
EXPORT_SYMBOL(snd_sof_suspend);
--
2.20.1
More information about the Alsa-devel
mailing list