[alsa-devel] [PATCH v2 1/2] ASoC: msm8916-wcd-analog: Simplify MIC BIAS Internal
Stephan Gerhold
stephan at gerhold.net
Tue Jan 14 19:12:28 CET 2020
At the moment, MIC BIAS Internal* and MIC BIAS External* both reference
the same register, and have a part of their initialization sequence
duplicated.
For example, the sequence for enabling MIC BIAS Internal1 is:
I1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN)
I2. Enable internal RBIAS (TX1_INT_RBIAS_EN bit in CDC_A_MICB_1_INT_RBIAS)
The sequence for enabling MIC BIAS External1 is:
E1. Enable MIC_BIAS1 supply (MICB_EN bit in CDC_A_MICB_1_EN)
(E2. Ideally, make sure internal RBIAS is disabled. However, this should
not happen in practice because DAPM will disable unused supplies...)
Right now we have:
SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_EN, 7, 0, ...) // I1
SND_SOC_DAPM_SUPPLY("MIC BIAS External1", CDC_A_MICB_1_EN, 7, 0, ...) // E1
and I2 is done in the PM event handler (pm8916_wcd_analog_enable_micbias_int1).
We can simplify this by defining a common DAPM supply for I1/E1 ("MIC_BIAS1"),
and one DAPM supply for I2 ("MIC BIAS Internal1"). Additional DAPM routes
ensure that we also enable the MIC_BIAS1 supply for the internal and external
pull up resistor.
Another advantage of this is that we now disable the internal RBIAS
when it is not needed. This makes it much easier to add support for
MIC BIAS Internal3 as a next step.
Tested-by: Nikita Travkin <nikitos.tr at gmail.com> # longcheer-l8150
Cc: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
Signed-off-by: Stephan Gerhold <stephan at gerhold.net>
---
v1: https://lore.kernel.org/alsa-devel/20200111164006.43074-4-stephan@gerhold.net/
Changes in v2:
- Use an extra DAPM supply for MIC_BIASX that is referenced by
MIC BIAS InternalX and MIC BIAS ExternalX, instead of combining it with
MIC BIAS ExternalX
- Clarify commit message
---
sound/soc/codecs/msm8916-wcd-analog.c | 112 ++++++++++----------------
1 file changed, 42 insertions(+), 70 deletions(-)
diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
index 1f7964beb20c..d6d727f5bae5 100644
--- a/sound/soc/codecs/msm8916-wcd-analog.c
+++ b/sound/soc/codecs/msm8916-wcd-analog.c
@@ -374,9 +374,8 @@ static void pm8916_wcd_analog_micbias_enable(struct snd_soc_component *component
}
-static int pm8916_wcd_analog_enable_micbias_ext(struct snd_soc_component
- *component, int event,
- int reg, unsigned int cap_mode)
+static int pm8916_wcd_analog_enable_micbias(struct snd_soc_component *component,
+ int event, unsigned int cap_mode)
{
switch (event) {
case SND_SOC_DAPM_POST_PMU:
@@ -389,72 +388,44 @@ static int pm8916_wcd_analog_enable_micbias_ext(struct snd_soc_component
return 0;
}
-static int pm8916_wcd_analog_enable_micbias_int(struct snd_soc_component
- *component, int event,
- int reg, u32 cap_mode)
+static int pm8916_wcd_analog_enable_micbias_int(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
- snd_soc_component_update_bits(component, reg, MICB_1_EN_PULL_DOWN_EN_MASK, 0);
snd_soc_component_update_bits(component, CDC_A_MICB_1_EN,
MICB_1_EN_OPA_STG2_TAIL_CURR_MASK,
MICB_1_EN_OPA_STG2_TAIL_CURR_1_60UA);
-
- break;
- case SND_SOC_DAPM_POST_PMU:
- pm8916_wcd_analog_micbias_enable(component);
- snd_soc_component_update_bits(component, CDC_A_MICB_1_EN,
- MICB_1_EN_BYP_CAP_MASK, cap_mode);
break;
}
return 0;
}
-static int pm8916_wcd_analog_enable_micbias_ext1(struct
- snd_soc_dapm_widget
- *w, struct snd_kcontrol
- *kcontrol, int event)
+static int pm8916_wcd_analog_enable_micbias1(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
{
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct pm8916_wcd_analog_priv *wcd = snd_soc_component_get_drvdata(component);
- return pm8916_wcd_analog_enable_micbias_ext(component, event, w->reg,
- wcd->micbias1_cap_mode);
+ return pm8916_wcd_analog_enable_micbias(component, event,
+ wcd->micbias1_cap_mode);
}
-static int pm8916_wcd_analog_enable_micbias_ext2(struct
- snd_soc_dapm_widget
- *w, struct snd_kcontrol
- *kcontrol, int event)
-{
- struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
- struct pm8916_wcd_analog_priv *wcd = snd_soc_component_get_drvdata(component);
-
- return pm8916_wcd_analog_enable_micbias_ext(component, event, w->reg,
- wcd->micbias2_cap_mode);
-
-}
-
-static int pm8916_wcd_analog_enable_micbias_int1(struct
- snd_soc_dapm_widget
- *w, struct snd_kcontrol
- *kcontrol, int event)
+static int pm8916_wcd_analog_enable_micbias2(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol,
+ int event)
{
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct pm8916_wcd_analog_priv *wcd = snd_soc_component_get_drvdata(component);
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
- snd_soc_component_update_bits(component, CDC_A_MICB_1_INT_RBIAS,
- MICB_1_INT_TX1_INT_RBIAS_EN_MASK,
- MICB_1_INT_TX1_INT_RBIAS_EN_ENABLE);
- break;
- }
+ return pm8916_wcd_analog_enable_micbias(component, event,
+ wcd->micbias2_cap_mode);
- return pm8916_wcd_analog_enable_micbias_int(component, event, w->reg,
- wcd->micbias1_cap_mode);
}
static int pm8916_mbhc_configure_bias(struct pm8916_wcd_analog_priv *priv,
@@ -564,9 +535,8 @@ static int pm8916_wcd_analog_enable_micbias_int2(struct
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
- snd_soc_component_update_bits(component, CDC_A_MICB_1_INT_RBIAS,
- MICB_1_INT_TX2_INT_RBIAS_EN_MASK,
- MICB_1_INT_TX2_INT_RBIAS_EN_ENABLE);
+ snd_soc_component_update_bits(component, CDC_A_MICB_2_EN,
+ CDC_A_MICB_2_PULL_DOWN_EN_MASK, 0);
break;
case SND_SOC_DAPM_POST_PMU:
pm8916_mbhc_configure_bias(wcd, true);
@@ -576,8 +546,7 @@ static int pm8916_wcd_analog_enable_micbias_int2(struct
break;
}
- return pm8916_wcd_analog_enable_micbias_int(component, event, w->reg,
- wcd->micbias2_cap_mode);
+ return pm8916_wcd_analog_enable_micbias_int(w, kcontrol, event);
}
static int pm8916_wcd_analog_enable_adc(struct snd_soc_dapm_widget *w,
@@ -878,14 +847,15 @@ static const struct snd_soc_dapm_route pm8916_wcd_analog_audio_map[] = {
{"SPK PA", NULL, "SPK DAC"},
{"SPK DAC", "Switch", "PDM_RX3"},
- {"MIC BIAS Internal1", NULL, "INT_LDO_H"},
- {"MIC BIAS Internal2", NULL, "INT_LDO_H"},
- {"MIC BIAS External1", NULL, "INT_LDO_H"},
- {"MIC BIAS External2", NULL, "INT_LDO_H"},
- {"MIC BIAS Internal1", NULL, "vdd-micbias"},
- {"MIC BIAS Internal2", NULL, "vdd-micbias"},
- {"MIC BIAS External1", NULL, "vdd-micbias"},
- {"MIC BIAS External2", NULL, "vdd-micbias"},
+ {"MIC_BIAS1", NULL, "INT_LDO_H"},
+ {"MIC_BIAS2", NULL, "INT_LDO_H"},
+ {"MIC_BIAS1", NULL, "vdd-micbias"},
+ {"MIC_BIAS2", NULL, "vdd-micbias"},
+
+ {"MIC BIAS External1", NULL, "MIC_BIAS1"},
+ {"MIC BIAS Internal1", NULL, "MIC_BIAS1"},
+ {"MIC BIAS External2", NULL, "MIC_BIAS2"},
+ {"MIC BIAS Internal2", NULL, "MIC_BIAS2"},
};
static const struct snd_soc_dapm_widget pm8916_wcd_analog_dapm_widgets[] = {
@@ -937,22 +907,24 @@ static const struct snd_soc_dapm_widget pm8916_wcd_analog_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("RX_BIAS", CDC_A_RX_COM_BIAS_DAC, 7, 0, NULL, 0),
/* TX */
- SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_EN, 7, 0,
- pm8916_wcd_analog_enable_micbias_int1,
- SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
- SND_SOC_DAPM_POST_PMD),
- SND_SOC_DAPM_SUPPLY("MIC BIAS Internal2", CDC_A_MICB_2_EN, 7, 0,
+ SND_SOC_DAPM_SUPPLY("MIC_BIAS1", CDC_A_MICB_1_EN, 7, 0,
+ pm8916_wcd_analog_enable_micbias1,
+ SND_SOC_DAPM_POST_PMU),
+ SND_SOC_DAPM_SUPPLY("MIC_BIAS2", CDC_A_MICB_2_EN, 7, 0,
+ pm8916_wcd_analog_enable_micbias2,
+ SND_SOC_DAPM_POST_PMU),
+
+ SND_SOC_DAPM_SUPPLY("MIC BIAS External1", SND_SOC_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("MIC BIAS External2", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_SUPPLY("MIC BIAS Internal1", CDC_A_MICB_1_INT_RBIAS, 7, 0,
+ pm8916_wcd_analog_enable_micbias_int,
+ SND_SOC_DAPM_PRE_PMU),
+ SND_SOC_DAPM_SUPPLY("MIC BIAS Internal2", CDC_A_MICB_1_INT_RBIAS, 4, 0,
pm8916_wcd_analog_enable_micbias_int2,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
SND_SOC_DAPM_POST_PMD),
- SND_SOC_DAPM_SUPPLY("MIC BIAS External1", CDC_A_MICB_1_EN, 7, 0,
- pm8916_wcd_analog_enable_micbias_ext1,
- SND_SOC_DAPM_POST_PMU),
- SND_SOC_DAPM_SUPPLY("MIC BIAS External2", CDC_A_MICB_2_EN, 7, 0,
- pm8916_wcd_analog_enable_micbias_ext2,
- SND_SOC_DAPM_POST_PMU),
-
SND_SOC_DAPM_ADC_E("ADC1", NULL, CDC_A_TX_1_EN, 7, 0,
pm8916_wcd_analog_enable_adc,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
--
2.24.1
More information about the Alsa-devel
mailing list