[alsa-devel] [PATCH v3] ALSA: usb-audio: Add boot quirk for MOTU M Series
Alexander Tsoy
alexander at tsoy.me
Sun Jan 12 11:23:58 CET 2020
Add delay to make sure that audio urbs are not sent too early.
Otherwise the device hangs. Windows driver makes ~2s delay, so use
about the same time delay value.
snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which
is an overkill. Thus a quirk that is called only once is implemented.
Also send two vendor-specific control messages before and after
the delay. This behaviour is blindly copied from the Windows driver.
Signed-off-by: Alexander Tsoy <alexander at tsoy.me>
---
v3 changes: fixed identations once more
sound/usb/card.c | 4 ++++
sound/usb/quirks.c | 38 ++++++++++++++++++++++++++++++++++++++
sound/usb/quirks.h | 5 +++++
3 files changed, 47 insertions(+)
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 9f743ebae615..2f582ac7cf78 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -600,6 +600,10 @@ static int usb_audio_probe(struct usb_interface *intf,
}
}
if (! chip) {
+ err = snd_usb_apply_boot_quirk_once(dev, intf, quirk, id);
+ if (err < 0)
+ return err;
+
/* it's a fresh one.
* now look for an empty slot and create a new card instance
*/
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 82184036437b..0464df785f2e 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1113,6 +1113,31 @@ static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev)
return err;
}
+static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
+{
+ int ret;
+
+ if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
+ return -EINVAL;
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0x0, 0, NULL, 0, 1000);
+
+ if (ret < 0)
+ return ret;
+
+ msleep(2000);
+
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0x20, 0, NULL, 0, 1000);
+
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
/*
* Setup quirks
*/
@@ -1297,6 +1322,19 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
return 0;
}
+int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
+ struct usb_interface *intf,
+ const struct snd_usb_audio_quirk *quirk,
+ unsigned int id)
+{
+ switch (id) {
+ case USB_ID(0x07fd, 0x0008): /* MOTU M Series */
+ return snd_usb_motu_m_series_boot_quirk(dev);
+ }
+
+ return 0;
+}
+
/*
* check if the device uses big-endian samples
*/
diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
index a80e0ddd0736..df0355843a4c 100644
--- a/sound/usb/quirks.h
+++ b/sound/usb/quirks.h
@@ -20,6 +20,11 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
const struct snd_usb_audio_quirk *quirk,
unsigned int usb_id);
+int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
+ struct usb_interface *intf,
+ const struct snd_usb_audio_quirk *quirk,
+ unsigned int usb_id);
+
void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
struct audioformat *fmt);
--
2.24.1
More information about the Alsa-devel
mailing list