[PATCH v3 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family

[Ricard Wanderlof]

On Wed, 19 Feb 2020, Dan Murphy wrote:

> Add the tlv320adcx140 codec driver family.
>

...

> +
> +static int adcx140_set_dai_fmt(struct snd_soc_dai *codec_dai,
> +                              unsigned int fmt)
> +{
> +       struct snd_soc_component *component = codec_dai->component;
> +       struct adcx140_priv *adcx140 =
> snd_soc_component_get_drvdata(component);
> +       u8 iface_reg1 = 0;
> +       u8 iface_reg2 = 0;
> +
> +       /* set master/slave audio interface */
> +       switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> +       case SND_SOC_DAIFMT_CBM_CFM:
> +               iface_reg2 |= ADCX140_BCLK_FSYNC_MASTER;

Although this sets up the codec to be I2S master, there doesn't seem to be 
a way of actually configuring the master clock frequency in master mode, 
as there is no .set_sysclk member in adcx140_dai_ops (and the 
corresponding register field appears never to be touched by the driver).

> +               break;
> +       case SND_SOC_DAIFMT_CBS_CFS:
> +               break;
> +       case SND_SOC_DAIFMT_CBS_CFM:
> +       case SND_SOC_DAIFMT_CBM_CFS:
> +       default:
> +               dev_err(component->dev, "Invalid DAI master/slave interface\n");
> +               return -EINVAL;
> +       }

...

> +
> +static int adcx140_codec_probe(struct snd_soc_component *component)
> +{
> +       struct adcx140_priv *adcx140 =
> snd_soc_component_get_drvdata(component);
> +       int sleep_cfg_val = ADCX140_WAKE_DEV;
> +       u8 bias_source;
> +       u8 vref_source;
> +       int ret;
> +
> +       ret = device_property_read_u8(adcx140->dev, "ti,mic-bias-source",
> +                                     &bias_source);
> +       if (ret)
> +               bias_source = ADCX140_MIC_BIAS_VAL_VREF;
> +
> +       if (bias_source != ADCX140_MIC_BIAS_VAL_VREF &&
> +           bias_source != ADCX140_MIC_BIAS_VAL_VREF_1096 &&
> +           bias_source != ADCX140_MIC_BIAS_VAL_AVDD) {
> +               dev_err(adcx140->dev, "Mic Bias source value is invalid\n");
> +               return -EINVAL;
> +       }
> +
> +       ret = device_property_read_u8(adcx140->dev, "ti,vref-source",
> +                                     &vref_source);
> +       if (ret)
> +               vref_source = ADCX140_MIC_BIAS_VREF_275V;
> +
> +       if (vref_source != ADCX140_MIC_BIAS_VREF_275V &&
> +           vref_source != ADCX140_MIC_BIAS_VREF_25V &&
> +           vref_source != ADCX140_MIC_BIAS_VREF_1375V) {

According to the data sheet, this setting controls the ADC full scale 
setting and has nothing to do with the mic bias voltage, hence using 
MIC_BIAS as part of the macro name is misleaading.

> +               dev_err(adcx140->dev, "Mic Bias source value is invalid\n");

Error text does not reflect the actual error, suggest "VREF value is 
invalid".

> +               return -EINVAL;
> +       }
> +
> +       bias_source |= vref_source;
> +
> +       ret = adcx140_reset(adcx140);
> +       if (ret)
> +               goto out;
> +
> +       if(adcx140->supply_areg == NULL)
> +               sleep_cfg_val |= ADCX140_AREG_INTERNAL;
> +
> +       ret = regmap_write(adcx140->regmap, ADCX140_SLEEP_CFG,
> sleep_cfg_val);
> +       if (ret) {
> +               dev_err(adcx140->dev, "setting sleep config failed %d\n",
> ret);
> +               goto out;
> +       }
> --
> 2.25.0
> 
> 
> 

/Ricard
-- 
Ricard Wolf Wanderlof                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30