[PATCH v3 03/10] ASoC: tegra: add Tegra210 based DMIC driver

[Jon Hunter]

On 21/02/2020 13:00, Mark Brown wrote:
> On Thu, Feb 20, 2020 at 12:04:45PM +0530, Sameer Pujar wrote:
> 
>> +++ b/sound/soc/tegra/tegra210_dmic.c
>> @@ -0,0 +1,515 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * tegra210_dmic.c - Tegra210 DMIC driver
>> + *
>> + * Copyright (c) 2020 NVIDIA CORPORATION.  All rights reserved.
> 
> Please make the entire comment a C++ one so things look more
> intentional.
> 
>> +	/* Below enables all filters - DCR, LP and SC */
>> +	{ TEGRA210_DMIC_DBG_CTRL, 0xe },
> 
> So this isn't the hardware default?
> 
>> +	srate = params_rate(params);
>> +	if (dmic->srate_override)
>> +		srate = dmic->srate_override;
> 
> How does this work for userspace?  If we just ignore the sample rate we
> were asked for I'd expect that the application would get upset.

Tegra has a hardware sample rate converter (though driver not yet
upstream or part of this initial series) and if using the sample-rate
converter, then the actual rate captured by the DMIC interface could be
different from the resulting sample-rate.

So we want a way to indicate to the DMIC it is capturing at rate X,
while the resulting sample-rate is Y.

I am not sure if there is a better way to do this? Ideally, the DMIC
would query the rate from the upstream MUX it is connected to, but I am
not sure if there is a way to do that. So right now it is a manual
process and the user has to configure these which are not ideal.

Cheers
Jon

-- 
nvpublic