[PATCH] ASoC: tas2562: Add support for digital volume control

[Dan Murphy]

Mark

On 2/20/20 12:45 PM, Mark Brown wrote:
> On Thu, Feb 20, 2020 at 11:27:21AM -0600, Dan Murphy wrote:
>
>> +	/* Set the Digital volume to -110dB */
>> +	ret = snd_soc_component_write(component, TAS2562_DVC_CFG4, 0x00);
>> +	if (ret)
>> +		return ret;
>> +	ret = snd_soc_component_write(component, TAS2562_DVC_CFG3, 0x00);
>> +	if (ret)
>> +		return ret;
>> +	ret = snd_soc_component_write(component, TAS2562_DVC_CFG2, 0x0d);
>> +	if (ret)
>> +		return ret;
>> +	ret = snd_soc_component_write(component, TAS2562_DVC_CFG1, 0x43);
>> +	if (ret)
>> +		return ret;
> Is there a reason not to use the chip default here?  Otherwise this
> looks good.

Chip default is set to 0dB full blast+ 0x40400000.  This sets the volume 
to -110dB.

I have the values backwards.  CFG4 should b 0x43 and CFG3 should be 0x0d 
and CFG1&2 should be 0.

I will resend v2 with this fixed.

Dan