[PATCH v2] ASoC: dt-bindings: stm32: convert sai to json-schema
Rob Herring
robh at kernel.org
Wed Feb 19 16:25:32 CET 2020
On Wed, Feb 12, 2020 at 02:12:59PM +0100, Olivier Moysan wrote:
> Convert the STM32 SAI bindings to DT schema format using json-schema.
>
> Signed-off-by: Olivier Moysan <olivier.moysan at st.com>
> ---
> Changes in v2:
> - use pattern for compatible of child nodes
> - rework dmas and clocks properties
> - add "additionalProperties"
> ---
> .../bindings/sound/st,stm32-sai.txt | 107 ----------
> .../bindings/sound/st,stm32-sai.yaml | 191 ++++++++++++++++++
> 2 files changed, 191 insertions(+), 107 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> deleted file mode 100644
> index 944743dd9212..000000000000
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> +++ /dev/null
> @@ -1,107 +0,0 @@
> -STMicroelectronics STM32 Serial Audio Interface (SAI).
> -
> -The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
> -as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
> -The SAI contains two independent audio sub-blocks. Each sub-block has
> -its own clock generator and I/O lines controller.
> -
> -Required properties:
> - - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
> - - reg: Base address and size of SAI common register set.
> - - clocks: Must contain phandle and clock specifier pairs for each entry
> - in clock-names.
> - - clock-names: Must contain "pclk" "x8k" and "x11k"
> - "pclk": Clock which feeds the peripheral bus interface.
> - Mandatory for "st,stm32h7-sai" compatible.
> - Not used for "st,stm32f4-sai" compatible.
> - "x8k": SAI parent clock for sampling rates multiple of 8kHz.
> - "x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
> - - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
> -
> -Optional properties:
> - - resets: Reference to a reset controller asserting the SAI
> -
> -SAI subnodes:
> -Two subnodes corresponding to SAI sub-block instances A et B can be defined.
> -Subnode can be omitted for unsused sub-block.
> -
> -SAI subnodes required properties:
> - - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
> - for SAI sub-block A or B respectively.
> - - reg: Base address and size of SAI sub-block register set.
> - - clocks: Must contain one phandle and clock specifier pair
> - for sai_ck which feeds the internal clock generator.
> - If the SAI shares a master clock, with another SAI set as MCLK
> - clock provider, SAI provider phandle must be specified here.
> - - clock-names: Must contain "sai_ck".
> - Must also contain "MCLK", if SAI shares a master clock,
> - with a SAI set as MCLK clock provider.
> - - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
> - - dma-names: identifier string for each DMA request line
> - "tx": if sai sub-block is configured as playback DAI
> - "rx": if sai sub-block is configured as capture DAI
> - - pinctrl-names: should contain only value "default"
> - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> -
> -SAI subnodes Optional properties:
> - - st,sync: specify synchronization mode.
> - By default SAI sub-block is in asynchronous mode.
> - This property sets SAI sub-block as slave of another SAI sub-block.
> - Must contain the phandle and index of the sai sub-block providing
> - the synchronization.
> - - st,iec60958: support S/PDIF IEC6958 protocol for playback
> - IEC60958 protocol is not available for capture.
> - By default, custom protocol is assumed, meaning that protocol is
> - configured according to protocol defined in related DAI link node,
> - such as i2s, left justified, right justified, dsp and pdm protocols.
> - Note: ac97 protocol is not supported by SAI driver
> - - #clock-cells: should be 0. This property must be present if the SAI device
> - is a master clock provider, according to clocks bindings, described in
> - Documentation/devicetree/bindings/clock/clock-bindings.txt.
> -
> -The device node should contain one 'port' child node with one child 'endpoint'
> -node, according to the bindings defined in Documentation/devicetree/bindings/
> -graph.txt.
> -
> -Example:
> -sound_card {
> - compatible = "audio-graph-card";
> - dais = <&sai1b_port>;
> -};
> -
> -sai1: sai1 at 40015800 {
> - compatible = "st,stm32h7-sai";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x40015800 0x400>;
> - reg = <0x40015800 0x4>;
> - clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
> - clock-names = "pclk", "x8k", "x11k";
> - interrupts = <87>;
> -
> - sai1a: audio-controller at 40015804 {
> - compatible = "st,stm32-sai-sub-a";
> - reg = <0x4 0x1C>;
> - clocks = <&rcc SAI1_CK>;
> - clock-names = "sai_ck";
> - dmas = <&dmamux1 1 87 0x400 0x0>;
> - dma-names = "tx";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_sai1a>;
> -
> - sai1b_port: port {
> - cpu_endpoint: endpoint {
> - remote-endpoint = <&codec_endpoint>;
> - format = "i2s";
> - };
> - };
> - };
> -};
> -
> -audio-codec {
> - codec_port: port {
> - codec_endpoint: endpoint {
> - remote-endpoint = <&cpu_endpoint>;
> - };
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> new file mode 100644
> index 000000000000..51dd2b3bdeb1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -0,0 +1,191 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 Serial Audio Interface (SAI)
> +
> +maintainers:
> + - Olivier Moysan <olivier.moysan at st.com>
> +
> +description:
> + The SAI interface (Serial Audio Interface) offers a wide set of audio
> + protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
> + The SAI contains two independent audio sub-blocks. Each sub-block has
> + its own clock generator and I/O lines controller.
> +
> +properties:
> + compatible:
> + enum:
> + - st,stm32f4-sai
> + - st,stm32h7-sai
> +
> + reg:
> + items:
> + - description: Base address and size of SAI common register set.
> + - description: Base address and size of SAI identification register set.
> + minItems: 1
> + maxItems: 2
> +
> + ranges:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 1
> +
> + clocks:
> + items:
> + - description: pclk feeds the peripheral bus interface.
> + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
> + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
> +
> + clock-names:
> + items:
> + - const: pclk
> + - const: x8k
> + - const: x11k
> +
> +required:
> + - compatible
> + - reg
> + - ranges
> + - "#address-cells"
> + - "#size-cells"
> + - clocks
> + - clock-names
> +
> +patternProperties:
> + "^audio-controller@[0-9a-f]+$":
> + type: object
> + description:
> + Two subnodes corresponding to SAI sub-block instances A et B
> + can be defined. Subnode can be omitted for unsused sub-block.
> +
> + properties:
> + compatible:
> + description: Compatible for SAI sub-block A or B.
> + pattern: "st,stm32-sai-sub-[ab]"
> +
> + "#sound-dai-cells":
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: sai_ck clock feeding the internal clock generator.
> + - description: MCLK clock from a SAI set as master clock provider.
> + minItems: 1
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: sai_ck
> + - const: MCLK
> + minItems: 1
> + maxItems: 2
> +
> + dmas:
> + maxItems: 1
> +
> + dma-names:
> + description: |
> + rx: SAI sub-block is configured as a capture DAI.
> + tx: SAI sub-block is configured as a playback DAI.
> + enum: [ rx, tx ]
> +
> + st,sync:
> + description:
> + Configure the SAI sub-block as slave of another SAI sub-block.
> + By default SAI sub-block is in asynchronous mode.
> + Must contain the phandle and index of the SAI sub-block providing
> + the synchronization.
> + allOf:
> + - $ref: /schemas/types.yaml#definitions/phandle-array
> + - maxItems: 1
> +
> + st,iec60958:
> + description:
> + If set, support S/PDIF IEC6958 protocol for playback.
> + IEC60958 protocol is not available for capture.
> + By default, custom protocol is assumed, meaning that protocol is
> + configured according to protocol defined in related DAI link node,
> + such as i2s, left justified, right justified, dsp and pdm protocols.
> + allOf:
> + - $ref: /schemas/types.yaml#definitions/flag
> +
> + "#clock-cells":
> + description: Configure the SAI device as master clock provider.
> + const: 0
> +
> + required:
> + - compatible
> + - "#sound-dai-cells"
> + - reg
> + - clocks
> + - clock-names
> + - dmas
> + - dma-names
> +
> + additionalProperties: false
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: st,stm32f4-sai
> +
> + - then:
The '-' makes this 2 different schema.
> + properties:
> + clocks:
> + items:
> + - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
> + - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
> +
> + clock-names:
> + items:
> + - const: x8k
> + - const: x11k
It is impossible for the first definition and this one to both be true.
You'll have to put the first definition in an 'else' clause here.
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/stm32mp1-clks.h>
> + #include <dt-bindings/reset/stm32mp1-resets.h>
> + sai1: sai at 4400a000 {
> + compatible = "st,stm32h7-sai";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x4400a000 0x400>;
> + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
> + clock-names = "pclk", "x8k", "x11k";
> + resets = <&rcc SAI1_R>;
> +
> + sai1a: audio-controller at 4400a004 {
> + compatible = "st,stm32-sai-sub-a";
> + #sound-dai-cells = <0>;
> + reg = <0x4 0x1c>;
> + clocks = <&rcc SAI1_K>;
> + clock-names = "sai_ck";
> + dmas = <&dmamux1 87 0x400 0x01>;
> + dma-names = "tx";
> + };
> + };
> +
> +...
> --
> 2.17.1
>
More information about the Alsa-devel
mailing list