[alsa-devel] [PATCH 4/4] ASoC: simple-card: Add support for codec-to-codec dai_links

[Jerome Brunet]

On Thu 13 Feb 2020 at 07:11, Samuel Holland <samuel at sholland.org> wrote:

> For now we assume there are only a few sets of valid PCM stream
> parameters, to avoid needing to specify them in the device tree. We
> also assume they are the same in both directions. We calculate the
> common subset of parameters, and then the existing code automatically
> chooses the highest quality of the remaining values.
>
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
>  .../devicetree/bindings/sound/simple-card.txt |  1 +
>  Documentation/sound/soc/codec-to-codec.rst    |  9 ++++-
>  include/sound/simple_card_utils.h             |  1 +
>  sound/soc/generic/simple-card-utils.c         | 39 +++++++++++++++++++
>  sound/soc/generic/simple-card.c               | 12 ++++++
>  5 files changed, 60 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
> index 79954cd6e37b..18a62e404a30 100644
> --- a/Documentation/devicetree/bindings/sound/simple-card.txt
> +++ b/Documentation/devicetree/bindings/sound/simple-card.txt
> @@ -63,6 +63,7 @@ Optional dai-link subnode properties:
>  - mclk-fs             			: Multiplication factor between stream
>  					  rate and codec mclk, applied only for
>  					  the dai-link.
> +- codec-to-codec			: Indicates a codec-to-codec
> dai-link.

I wonder if such property could be viewed as a Linux implementation
detail ?

Similar discussion around DPCM:

* https://lore.kernel.org/linux-devicetree/20191014115635.GB4826@sirena.co.uk/#t
* https://alsa-devel.alsa-project.narkive.com/NCs4MsqL/simle-card-dt-style-for-dpcm#post4

Should the card figure out the codec-to-codec links on its own or is it
something generic enough to put in DT ?

In the Amlogic card driver, I'm using the compatible string of the
device to figure out if CPU is a CODEC.
It is ad-hoc and, to be honest, I'm not entirely happy with this
solution but I could not figure out a better one yet.

>  
>  For backward compatibility the frame-master and bitclock-master
>  properties can be used as booleans in codec subnode to indicate if the
> diff --git a/Documentation/sound/soc/codec-to-codec.rst b/Documentation/sound/soc/codec-to-codec.rst
> index 810109d7500d..efe0a8c07933 100644
> --- a/Documentation/sound/soc/codec-to-codec.rst
> +++ b/Documentation/sound/soc/codec-to-codec.rst
> @@ -104,5 +104,10 @@ Make sure to name your corresponding cpu and codec playback and capture
>  dai names ending with "Playback" and "Capture" respectively as dapm core
>  will link and power those dais based on the name.
>  
> -Note that in current device tree there is no way to mark a dai_link
> -as codec to codec. However, it may change in future.
> +A dai_link in a "simple-audio-card" can be marked as codec to codec in
> +the device tree by adding the "codec-to-codec" property. The dai_link
> +will be initialized with the subset of stream parameters (channels,
> +format, sample rate) supported by all DAIs on the link. Since there is
> +no way to provide these parameters in the device tree, this is mostly
> +useful for communication with simple fixed-function codecs, such as a
> +Bluetooth controller or cellular modem.
> diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h
> index bbdd1542d6f1..80b60237b3cd 100644
> --- a/include/sound/simple_card_utils.h
> +++ b/include/sound/simple_card_utils.h
> @@ -49,6 +49,7 @@ struct asoc_simple_priv {
>  		struct asoc_simple_data adata;
>  		struct snd_soc_codec_conf *codec_conf;
>  		unsigned int mclk_fs;
> +		bool codec_to_codec;
>  	} *dai_props;
>  	struct asoc_simple_jack hp_jack;
>  	struct asoc_simple_jack mic_jack;
> diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
> index 9b794775df53..2de4cfead790 100644
> --- a/sound/soc/generic/simple-card-utils.c
> +++ b/sound/soc/generic/simple-card-utils.c
> @@ -331,6 +331,41 @@ static int asoc_simple_init_dai(struct snd_soc_dai *dai,
>  	return 0;
>  }
>  
> +static int asoc_simple_init_dai_link_params(struct snd_soc_pcm_runtime *rtd,
> +					    struct simple_dai_props *dai_props)
> +{
> +	struct snd_soc_dai_link *dai_link = rtd->dai_link;
> +	struct snd_soc_pcm_stream *params;
> +	struct snd_pcm_hardware hw;
> +	int ret;
> +
> +	if (!dai_props->codec_to_codec)
> +		return 0;
> +
> +	/* Assumes the hardware capabilities are the same in both directions */
> +	ret = snd_soc_runtime_calc_hw(rtd, &hw, SNDRV_PCM_STREAM_PLAYBACK);
> +	if (ret < 0) {
> +		dev_err(rtd->dev, "simple-card: no valid dai_link params\n");
> +		return ret;
> +	}
> +
> +	params = devm_kzalloc(rtd->dev, sizeof(*params), GFP_KERNEL);
> +	if (!params)
> +		return -ENOMEM;
> +
> +	params->formats = hw.formats;
> +	params->rates = hw.rates;
> +	params->rate_min = hw.rate_min;
> +	params->rate_max = hw.rate_max;
> +	params->channels_min = hw.channels_min;
> +	params->channels_max = hw.channels_max;
> +
> +	dai_link->params = params;
> +	dai_link->num_params = 1;
> +
> +	return 0;
> +}
> +
>  int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
>  {
>  	struct asoc_simple_priv *priv = snd_soc_card_get_drvdata(rtd->card);
> @@ -347,6 +382,10 @@ int asoc_simple_dai_init(struct snd_soc_pcm_runtime *rtd)
>  	if (ret < 0)
>  		return ret;
>  
> +	ret = asoc_simple_init_dai_link_params(rtd, dai_props);
> +	if (ret < 0)
> +		return ret;
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(asoc_simple_dai_init);
> diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
> index 55e9f8800b3e..179ab4482d10 100644
> --- a/sound/soc/generic/simple-card.c
> +++ b/sound/soc/generic/simple-card.c
> @@ -77,6 +77,16 @@ static int asoc_simple_parse_dai(struct device_node *node,
>  	return 0;
>  }
>  
> +static void simple_parse_codec_to_codec(struct device_node *node,
> +					struct simple_dai_props *props,
> +					char *prefix)
> +{
> +	char prop[128];
> +
> +	snprintf(prop, sizeof(prop), "%scodec-to-codec", prefix);
> +	props->codec_to_codec = of_property_read_bool(node, prop);
> +}
> +
>  static void simple_parse_convert(struct device *dev,
>  				 struct device_node *np,
>  				 struct asoc_simple_data *adata)
> @@ -217,6 +227,7 @@ static int simple_dai_link_of_dpcm(struct asoc_simple_priv *priv,
>  					     "prefix");
>  	}
>  
> +	simple_parse_codec_to_codec(node, dai_props, prefix);
>  	simple_parse_convert(dev, np, &dai_props->adata);
>  	simple_parse_mclk_fs(top, np, codec, dai_props, prefix);
>  
> @@ -292,6 +303,7 @@ static int simple_dai_link_of(struct asoc_simple_priv *priv,
>  	if (ret < 0)
>  		goto dai_link_of_err;
>  
> +	simple_parse_codec_to_codec(node, dai_props, prefix);
>  	simple_parse_mclk_fs(top, cpu, codec, dai_props, prefix);
>  
>  	ret = asoc_simple_parse_cpu(cpu, dai_link, &single_cpu);