[alsa-devel] [PATCH] ASoC: rt5682: Enable PLL2 function

derek.fang at realtek.com derek.fang at realtek.com
Thu Feb 13 08:05:10 CET 2020


From: "derek.fang" <derek.fang at realtek.com>

Enable RT5682 PLL2 function to implement the more complex
frequency conversion.

Signed-off-by: derek.fang <derek.fang at realtek.com>
---
 sound/soc/codecs/rt5682.c | 211 ++++++++++++++++++++++++++++++++++++----------
 sound/soc/codecs/rt5682.h |  39 ++++++++-
 2 files changed, 203 insertions(+), 47 deletions(-)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 82a6366..9fbb386 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -64,9 +64,9 @@ struct rt5682_priv {
 	int bclk[RT5682_AIFS];
 	int master[RT5682_AIFS];
 
-	int pll_src;
-	int pll_in;
-	int pll_out;
+	int pll_src[RT5682_PLLS];
+	int pll_in[RT5682_PLLS];
+	int pll_out[RT5682_PLLS];
 
 	int jack_type;
 };
@@ -75,6 +75,7 @@ static const struct reg_sequence patch_list[] = {
 	{RT5682_HP_IMP_SENS_CTRL_19, 0x1000},
 	{RT5682_DAC_ADC_DIG_VOL1, 0xa020},
 	{RT5682_I2C_CTRL, 0x000f},
+	{RT5682_PLL2_INTERNAL, 0x8266},
 };
 
 static const struct reg_default rt5682_reg[] = {
@@ -222,7 +223,7 @@ static const struct reg_default rt5682_reg[] = {
 	{0x0148, 0x0000},
 	{0x0149, 0x0000},
 	{0x0150, 0x79a1},
-	{0x0151, 0x0000},
+	{0x0156, 0xaaaa},
 	{0x0160, 0x4ec0},
 	{0x0161, 0x0080},
 	{0x0162, 0x0200},
@@ -928,10 +929,10 @@ static int rt5682_headset_detect(struct snd_soc_component *component,
 			RT5682_PWR_VREF2 | RT5682_PWR_MB,
 			RT5682_PWR_VREF2 | RT5682_PWR_MB);
 		snd_soc_component_update_bits(component,
-				RT5682_PWR_ANLG_1, RT5682_PWR_FV2, 0);
+			RT5682_PWR_ANLG_1, RT5682_PWR_FV2, 0);
 		usleep_range(15000, 20000);
 		snd_soc_component_update_bits(component,
-				RT5682_PWR_ANLG_1, RT5682_PWR_FV2, RT5682_PWR_FV2);
+			RT5682_PWR_ANLG_1, RT5682_PWR_FV2, RT5682_PWR_FV2);
 		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
 			RT5682_PWR_CBJ, RT5682_PWR_CBJ);
 
@@ -1298,6 +1299,21 @@ static int is_sys_clk_from_pll1(struct snd_soc_dapm_widget *w,
 		return 0;
 }
 
+static int is_sys_clk_from_pll2(struct snd_soc_dapm_widget *w,
+			 struct snd_soc_dapm_widget *sink)
+{
+	unsigned int val;
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	val = snd_soc_component_read32(component, RT5682_GLB_CLK);
+	val &= RT5682_SCLK_SRC_MASK;
+	if (val == RT5682_SCLK_SRC_PLL2)
+		return 1;
+	else
+		return 0;
+}
+
 static int is_using_asrc(struct snd_soc_dapm_widget *w,
 			 struct snd_soc_dapm_widget *sink)
 {
@@ -1612,9 +1628,11 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 	SND_SOC_DAPM_SUPPLY("PLL2B", RT5682_PWR_ANLG_3, RT5682_PWR_PLL2B_BIT,
 		0, NULL, 0),
 	SND_SOC_DAPM_SUPPLY("PLL2F", RT5682_PWR_ANLG_3, RT5682_PWR_PLL2F_BIT,
-		0, NULL, 0),
+		0, set_filter_clk, SND_SOC_DAPM_PRE_PMU),
 	SND_SOC_DAPM_SUPPLY("Vref1", RT5682_PWR_ANLG_1, RT5682_PWR_VREF1_BIT, 0,
 		rt5655_set_verf, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
+	SND_SOC_DAPM_SUPPLY("Vref2", RT5682_PWR_ANLG_1, RT5682_PWR_VREF2_BIT, 0,
+		NULL, 0),
 
 	/* ASRC */
 	SND_SOC_DAPM_SUPPLY_S("DAC STO1 ASRC", 1, RT5682_PLL_TRACK_1,
@@ -1796,7 +1814,11 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
 static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
 	/*PLL*/
 	{"ADC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll1},
+	{"ADC Stereo1 Filter", NULL, "PLL2B", is_sys_clk_from_pll2},
+	{"ADC Stereo1 Filter", NULL, "PLL2F", is_sys_clk_from_pll2},
 	{"DAC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll1},
+	{"DAC Stereo1 Filter", NULL, "PLL2B", is_sys_clk_from_pll2},
+	{"DAC Stereo1 Filter", NULL, "PLL2F", is_sys_clk_from_pll2},
 
 	/*ASRC*/
 	{"ADC Stereo1 Filter", NULL, "ADC STO1 ASRC", is_using_asrc},
@@ -2053,8 +2075,10 @@ static int rt5682_hw_params(struct snd_pcm_substream *substream,
 			RT5682_I2S1_DL_MASK, len_1);
 		if (rt5682->master[RT5682_AIF1]) {
 			snd_soc_component_update_bits(component,
-				RT5682_ADDA_CLK_1, RT5682_I2S_M_DIV_MASK,
-				pre_div << RT5682_I2S_M_DIV_SFT);
+				RT5682_ADDA_CLK_1, RT5682_I2S_M_DIV_MASK |
+				RT5682_I2S_CLK_SRC_MASK,
+				pre_div << RT5682_I2S_M_DIV_SFT |
+				(rt5682->sysclk_src) << RT5682_I2S_CLK_SRC_SFT);
 		}
 		if (params_channels(params) == 1) /* mono mode */
 			snd_soc_component_update_bits(component,
@@ -2227,61 +2251,157 @@ static int rt5682_set_component_pll(struct snd_soc_component *component,
 		unsigned int freq_out)
 {
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
-	struct rl6231_pll_code pll_code;
+	struct rl6231_pll_code pll_code, pll2f_code, pll2b_code;
+	unsigned int pll2_fout1;
 	int ret;
 
-	if (source == rt5682->pll_src && freq_in == rt5682->pll_in &&
-	    freq_out == rt5682->pll_out)
+	if (source == rt5682->pll_src[pll_id] &&
+	    freq_in == rt5682->pll_in[pll_id] &&
+	    freq_out == rt5682->pll_out[pll_id])
 		return 0;
 
 	if (!freq_in || !freq_out) {
 		dev_dbg(component->dev, "PLL disabled\n");
 
-		rt5682->pll_in = 0;
-		rt5682->pll_out = 0;
+		rt5682->pll_in[pll_id] = 0;
+		rt5682->pll_out[pll_id] = 0;
 		snd_soc_component_update_bits(component, RT5682_GLB_CLK,
 			RT5682_SCLK_SRC_MASK, RT5682_SCLK_SRC_MCLK);
 		return 0;
 	}
 
-	switch (source) {
-	case RT5682_PLL1_S_MCLK:
-		snd_soc_component_update_bits(component, RT5682_GLB_CLK,
-			RT5682_PLL1_SRC_MASK, RT5682_PLL1_SRC_MCLK);
-		break;
-	case RT5682_PLL1_S_BCLK1:
-		snd_soc_component_update_bits(component, RT5682_GLB_CLK,
-				RT5682_PLL1_SRC_MASK, RT5682_PLL1_SRC_BCLK1);
-		break;
-	default:
-		dev_err(component->dev, "Unknown PLL Source %d\n", source);
-		return -EINVAL;
-	}
+	if (pll_id == RT5682_PLL2) {
+		switch (source) {
+		case RT5682_PLL2_S_MCLK:
+			snd_soc_component_update_bits(component,
+				RT5682_GLB_CLK, RT5682_PLL2_SRC_MASK,
+				RT5682_PLL2_SRC_MCLK);
+			break;
+		default:
+			dev_err(component->dev, "Unknown PLL2 Source %d\n",
+				source);
+			return -EINVAL;
+		}
 
-	ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
-	if (ret < 0) {
-		dev_err(component->dev, "Unsupport input clock %d\n", freq_in);
-		return ret;
+		/**
+		 * PLL2 concatenates 2 PLL units.
+		 * We suggest the Fout of the front PLL is 3.84MHz.
+		 */
+		pll2_fout1 = 3840000;
+		ret = rl6231_pll_calc(freq_in, pll2_fout1, &pll2f_code);
+		if (ret < 0) {
+			dev_err(component->dev, "Unsupport input clock %d\n",
+				freq_in);
+			return ret;
+		}
+		dev_dbg(component->dev, "PLL2F: fin=%d fout=%d bypass=%d m=%d n=%d k=%d\n",
+			freq_in, pll2_fout1,
+			pll2f_code.m_bp,
+			(pll2f_code.m_bp ? 0 : pll2f_code.m_code),
+			pll2f_code.n_code, pll2f_code.k_code);
+
+		ret = rl6231_pll_calc(pll2_fout1, freq_out, &pll2b_code);
+		if (ret < 0) {
+			dev_err(component->dev, "Unsupport input clock %d\n",
+				pll2_fout1);
+			return ret;
+		}
+		dev_dbg(component->dev, "PLL2B: fin=%d fout=%d bypass=%d m=%d n=%d k=%d\n",
+			pll2_fout1, freq_out,
+			pll2b_code.m_bp,
+			(pll2b_code.m_bp ? 0 : pll2b_code.m_code),
+			pll2b_code.n_code, pll2b_code.k_code);
+
+		snd_soc_component_write(component, RT5682_PLL2_CTRL_1,
+			pll2f_code.k_code << RT5682_PLL2F_K_SFT |
+			pll2b_code.k_code << RT5682_PLL2B_K_SFT |
+			pll2b_code.m_code);
+		snd_soc_component_write(component, RT5682_PLL2_CTRL_2,
+			pll2f_code.m_code << RT5682_PLL2F_M_SFT |
+			pll2b_code.n_code);
+		snd_soc_component_write(component, RT5682_PLL2_CTRL_3,
+			pll2f_code.n_code << RT5682_PLL2F_N_SFT);
+		snd_soc_component_update_bits(component, RT5682_PLL2_CTRL_4,
+			RT5682_PLL2B_M_BP_MASK | RT5682_PLL2F_M_BP_MASK | 0xf,
+			(pll2b_code.m_bp ? 1 : 0) << RT5682_PLL2B_M_BP_SFT |
+			(pll2f_code.m_bp ? 1 : 0) << RT5682_PLL2F_M_BP_SFT |
+			0xf);
+	} else {
+		switch (source) {
+		case RT5682_PLL1_S_MCLK:
+			snd_soc_component_update_bits(component,
+				RT5682_GLB_CLK, RT5682_PLL1_SRC_MASK,
+				RT5682_PLL1_SRC_MCLK);
+			break;
+		case RT5682_PLL1_S_BCLK1:
+			snd_soc_component_update_bits(component,
+				RT5682_GLB_CLK, RT5682_PLL1_SRC_MASK,
+				RT5682_PLL1_SRC_BCLK1);
+			break;
+		default:
+			dev_err(component->dev, "Unknown PLL1 Source %d\n",
+				source);
+			return -EINVAL;
+		}
+
+		ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
+		if (ret < 0) {
+			dev_err(component->dev, "Unsupport input clock %d\n",
+				freq_in);
+			return ret;
+		}
+
+		dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
+			pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
+			pll_code.n_code, pll_code.k_code);
+
+		snd_soc_component_write(component, RT5682_PLL_CTRL_1,
+			pll_code.n_code << RT5682_PLL_N_SFT | pll_code.k_code);
+		snd_soc_component_write(component, RT5682_PLL_CTRL_2,
+		    (pll_code.m_bp ? 0 : pll_code.m_code) << RT5682_PLL_M_SFT |
+		    pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST);
 	}
 
-	dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
-		pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
-		pll_code.n_code, pll_code.k_code);
+	rt5682->pll_in[pll_id] = freq_in;
+	rt5682->pll_out[pll_id] = freq_out;
+	rt5682->pll_src[pll_id] = source;
+
+	return 0;
+}
+
+static int rt5682_set_bclk1_ratio(struct snd_soc_dai *dai, unsigned int ratio)
+{
+	struct snd_soc_component *component = dai->component;
+	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
 
-	snd_soc_component_write(component, RT5682_PLL_CTRL_1,
-		pll_code.n_code << RT5682_PLL_N_SFT | pll_code.k_code);
-	snd_soc_component_write(component, RT5682_PLL_CTRL_2,
-		(pll_code.m_bp ? 0 : pll_code.m_code) << RT5682_PLL_M_SFT |
-		pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST);
+	rt5682->bclk[dai->id] = ratio;
 
-	rt5682->pll_in = freq_in;
-	rt5682->pll_out = freq_out;
-	rt5682->pll_src = source;
+	switch (ratio) {
+	case 256:
+		snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL,
+			RT5682_TDM_BCLK_MS1_MASK, RT5682_TDM_BCLK_MS1_256);
+		break;
+	case 128:
+		snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL,
+			RT5682_TDM_BCLK_MS1_MASK, RT5682_TDM_BCLK_MS1_128);
+		break;
+	case 64:
+		snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL,
+			RT5682_TDM_BCLK_MS1_MASK, RT5682_TDM_BCLK_MS1_64);
+		break;
+	case 32:
+		snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL,
+			RT5682_TDM_BCLK_MS1_MASK, RT5682_TDM_BCLK_MS1_32);
+		break;
+	default:
+		dev_err(dai->dev, "Invalid bclk1 ratio %d\n", ratio);
+		return -EINVAL;
+	}
 
 	return 0;
 }
 
-static int rt5682_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
+static int rt5682_set_bclk2_ratio(struct snd_soc_dai *dai, unsigned int ratio)
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
@@ -2300,7 +2420,7 @@ static int rt5682_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio)
 			RT5682_I2S2_BCLK_MS2_32);
 		break;
 	default:
-		dev_err(dai->dev, "Invalid bclk ratio %d\n", ratio);
+		dev_err(dai->dev, "Invalid bclk2 ratio %d\n", ratio);
 		return -EINVAL;
 	}
 
@@ -2389,12 +2509,13 @@ static const struct snd_soc_dai_ops rt5682_aif1_dai_ops = {
 	.hw_params = rt5682_hw_params,
 	.set_fmt = rt5682_set_dai_fmt,
 	.set_tdm_slot = rt5682_set_tdm_slot,
+	.set_bclk_ratio = rt5682_set_bclk1_ratio,
 };
 
 static const struct snd_soc_dai_ops rt5682_aif2_dai_ops = {
 	.hw_params = rt5682_hw_params,
 	.set_fmt = rt5682_set_dai_fmt,
-	.set_bclk_ratio = rt5682_set_bclk_ratio,
+	.set_bclk_ratio = rt5682_set_bclk2_ratio,
 };
 
 static struct snd_soc_dai_driver rt5682_dai[] = {
diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h
index 4d3a8c4..465c99b 100644
--- a/sound/soc/codecs/rt5682.h
+++ b/sound/soc/codecs/rt5682.h
@@ -177,7 +177,7 @@
 #define RT5682_TEST_MODE_CTRL_4			0x0148
 #define RT5682_TEST_MODE_CTRL_5			0x0149
 #define RT5682_PLL1_INTERNAL			0x0150
-#define RT5682_PLL2_INTERNAL			0x0151
+#define RT5682_PLL2_INTERNAL			0x0156
 #define RT5682_STO_NG2_CTRL_1			0x0160
 #define RT5682_STO_NG2_CTRL_2			0x0161
 #define RT5682_STO_NG2_CTRL_3			0x0162
@@ -738,7 +738,7 @@
 #define RT5682_ADC_OSR_D_24			(0x7 << 12)
 #define RT5682_ADC_OSR_D_32			(0x8 << 12)
 #define RT5682_ADC_OSR_D_48			(0x9 << 12)
-#define RT5682_I2S_M_DIV_MASK			(0xf << 12)
+#define RT5682_I2S_M_DIV_MASK			(0xf << 8)
 #define RT5682_I2S_M_DIV_SFT			8
 #define RT5682_I2S_M_D_1			(0x0 << 8)
 #define RT5682_I2S_M_D_2			(0x1 << 8)
@@ -820,6 +820,12 @@
 #define RT5682_TDM_DF_PCM_B			(0x3 << 11)
 #define RT5682_TDM_DF_PCM_A_N			(0x6 << 11)
 #define RT5682_TDM_DF_PCM_B_N			(0x7 << 11)
+#define RT5682_TDM_BCLK_MS1_MASK		(0x3 << 9)
+#define RT5682_TDM_BCLK_MS1_SFT			9
+#define RT5682_TDM_BCLK_MS1_32			(0x0 << 9)
+#define RT5682_TDM_BCLK_MS1_64			(0x1 << 9)
+#define RT5682_TDM_BCLK_MS1_128			(0x2 << 9)
+#define RT5682_TDM_BCLK_MS1_256			(0x3 << 9)
 #define RT5682_TDM_CL_MASK			(0x3 << 4)
 #define RT5682_TDM_CL_16			(0x0 << 4)
 #define RT5682_TDM_CL_20			(0x1 << 4)
@@ -1049,6 +1055,28 @@
 #define RT5682_PWR_CLK1M_PD			(0x0 << 8)
 #define RT5682_PWR_CLK1M_PU			(0x1 << 8)
 
+/* PLL2 M/N/K Code Control 1 (0x009b) */
+#define RT5682_PLL2F_K_MASK			(0x1f << 8)
+#define RT5682_PLL2F_K_SFT			8
+#define RT5682_PLL2B_K_MASK			(0xf << 4)
+#define RT5682_PLL2B_K_SFT			4
+#define RT5682_PLL2B_M_MASK			(0xf << 0)
+
+/* PLL2 M/N/K Code Control 2 (0x009c) */
+#define RT5682_PLL2F_M_MASK			(0x3f << 8)
+#define RT5682_PLL2F_M_SFT			8
+#define RT5682_PLL2B_N_MASK			(0x3f << 0)
+
+/* PLL2 M/N/K Code Control 2 (0x009d) */
+#define RT5682_PLL2F_N_MASK			(0x7f << 8)
+#define RT5682_PLL2F_N_SFT			8
+
+/* PLL2 M/N/K Code Control 2 (0x009e) */
+#define RT5682_PLL2B_M_BP_MASK			(0x1 << 11)
+#define RT5682_PLL2B_M_BP_SFT			11
+#define RT5682_PLL2F_M_BP_MASK			(0x1 << 7)
+#define RT5682_PLL2F_M_BP_SFT			7
+
 /* RC Clock Control (0x009f) */
 #define RT5682_POW_IRQ				(0x1 << 15)
 #define RT5682_POW_JDH				(0x1 << 14)
@@ -1315,6 +1343,13 @@ enum {
 	RT5682_PLL1_S_MCLK,
 	RT5682_PLL1_S_BCLK1,
 	RT5682_PLL1_S_RCCLK,
+	RT5682_PLL2_S_MCLK,
+};
+
+enum {
+	RT5682_PLL1,
+	RT5682_PLL2,
+	RT5682_PLLS,
 };
 
 enum {
-- 
2.7.4



More information about the Alsa-devel mailing list