[alsa-devel] [PATCH 2/2] ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family
Mark Brown
broonie at kernel.org
Mon Feb 10 14:52:52 CET 2020
On Fri, Feb 07, 2020 at 01:45:33PM -0600, Dan Murphy wrote:
> + /* interface format */
> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> + case SND_SOC_DAIFMT_I2S:
> + iface_reg1 |= ADCX140_I2S_MODE_BIT;
> + break;
> + case SND_SOC_DAIFMT_LEFT_J:
> + iface_reg1 |= ADCX140_LEFT_JUST_BIT;
> + break;
> + case SND_SOC_DAIFMT_DSP_A:
> + case SND_SOC_DAIFMT_DSP_B:
> + break;
_DSP_A and _DSP_B are two different format so I'd expect the device to
be configured differently for them, or for only one to be supported.
> +static int adcx140_mute(struct snd_soc_dai *codec_dai, int mute)
> +{
> + struct snd_soc_component *component = codec_dai->component;
> + int config_reg;
> + int mic_enable;
> + int i;
> +
> + /* There is not a single register to mute. Each enabled path has to be
> + * muted individually. Read which path is enabled and mute it.
> + */
> + snd_soc_component_read(component, ADCX140_IN_CH_EN, &mic_enable);
> + if (!mic_enable)
> + return 0;
You could also just offer this control to userspace, it's not
*essential* to have this operation though it can help with glitching
during stream startup.
> +
> + for (i = 0; i < ADCX140_MAX_CHANNELS; i++) {
> + config_reg = ADCX140_CH8_CFG2 - (5 * i);
> + if (!(mic_enable & BIT(i)))
> + continue;
> +
> + if (mute)
> + snd_soc_component_write(component, config_reg, 0);
> + }
How does the unmute work?
> + internal_reg = device_property_present(adcx140->dev,
> + "ti,use-internal-areg");
> +
> + if (internal_reg)
> + sleep_cfg_val |= ADCX140_AREG_INTERNAL;
Does this actually need a specific property or could you support the
regulator API and then use regulator_get_optional() to figure out if an
external AVDD is attached?
> +static int adcx140_codec_probe(struct snd_soc_component *component)
> +{
> + struct adcx140_priv *adcx140 = snd_soc_component_get_drvdata(component);
> +
> + return adc5410_init(adcx140);
> +}
Does the separate init function buy us anything?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20200210/bbe0682b/attachment.sig>
More information about the Alsa-devel
mailing list