[alsa-devel] [PATCH 7/8] dts: msm8996/db820c: enable primary pcm and quaternary i2s
Bjorn Andersson
bjorn.andersson at linaro.org
Sun Feb 9 00:42:20 CET 2020
On Fri 07 Feb 12:50 PST 2020, Adam Serbinski wrote:
Please make subject
"arm64: dts: qcom: db820c: Enable primary PCM and quaternary I2S"
Regards,
Bjorn
> This patch adds support to primary pcm and quaternary i2s ports.
>
> Signed-off-by: Adam Serbinski <adam at serbinski.com>
> CC: Andy Gross <agross at kernel.org>
> CC: Mark Rutland <mark.rutland at arm.com>
> CC: Liam Girdwood <lgirdwood at gmail.com>
> CC: Patrick Lai <plai at codeaurora.org>
> CC: Banajit Goswami <bgoswami at codeaurora.org>
> CC: Jaroslav Kysela <perex at perex.cz>
> CC: Takashi Iwai <tiwai at suse.com>
> CC: alsa-devel at alsa-project.org
> CC: linux-arm-msm at vger.kernel.org
> CC: devicetree at vger.kernel.org
> CC: linux-kernel at vger.kernel.org
> ---
> arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 113 +++++++++++++
> arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 162 +++++++++++++++++++
> 2 files changed, 275 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> index dba3488492f1..4149ac4147a0 100644
> --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> @@ -683,8 +683,31 @@
> };
> };
>
> +/* PRI I2S on QCA6174 and QUAT I2S on LS each uses 2 I2S SD Lines for audio */
> +&q6afedai {
> + pi2s at 16 {
> + reg = <16>;
> + qcom,sd-lines = <1>;
> + };
> + pi2s at 17 {
> + reg = <17>;
> + qcom,sd-lines = <0>;
> + };
> + qi2s at 22 {
> + reg = <22>;
> + qcom,sd-lines = <0>;
> + };
> + qi2s at 23 {
> + reg = <23>;
> + qcom,sd-lines = <1>;
> + };
> +};
> +
> &sound {
> compatible = "qcom,apq8096-sndcard";
> + pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active &pri_mi2s_active &pri_mi2s_sd0_active &pri_mi2s_sd1_active>;
> + pinctrl-names = "default";
> +
> model = "DB820c";
> audio-routing = "RX_BIAS", "MCLK";
>
> @@ -709,6 +732,41 @@
> };
> };
>
> + mm4-dai-link {
> + link-name = "MultiMedia4";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
> + };
> + };
> +
> + mm5-dai-link {
> + link-name = "MultiMedia5";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
> + };
> + };
> +
> + mm6-dai-link {
> + link-name = "MultiMedia6";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
> + };
> + };
> +
> + mm7-dai-link {
> + link-name = "MultiMedia7";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>;
> + };
> + };
> +
> + mm8-dai-link {
> + link-name = "MultiMedia8";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>;
> + };
> + };
> +
> hdmi-dai-link {
> link-name = "HDMI";
> cpu {
> @@ -753,4 +811,59 @@
> sound-dai = <&wcd9335 1>;
> };
> };
> +
> + scoplay-dai-link {
> + link-name = "SCO-PCM-Playback";
> + cpu {
> + sound-dai = <&q6afedai PRIMARY_PCM_RX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> + };
> +
> + scocap-dai-link {
> + link-name = "SCO-PCM-Capture";
> + cpu {
> + sound-dai = <&q6afedai PRIMARY_PCM_TX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> + };
> +
> + mi2splay-dai-link {
> + link-name = "QUAT-MI2S-Playback";
> + cpu {
> + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> +
> +// EXAMPLE: For adding real codecs
> +// codec {
> +// sound-dai = <&pcm5142_4c>, <&pcm5142_4d>;
> +// };
> +
> + };
> +
> + mi2scap-dai-link {
> + link-name = "QUAT-MI2S-Capture";
> + cpu {
> + sound-dai = <&q6afedai QUATERNARY_MI2S_TX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> +
> +// EXAMPLE: For adding real codecs
> +// codec {
> +// sound-dai = <&pcm1865>;
> +// };
> + };
> };
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
> index ac1ede579361..e8221c4d05f7 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi
> @@ -288,6 +288,168 @@
> };
> };
>
> + pri_mi2s_active: pri_mi2s_active {
> + mux {
> + pins = "gpio65", "gpio66";
> + function = "pri_mi2s";
> + };
> + config {
> + pins = "gpio65", "gpio66";
> + drive-strength = <8>; /* 8 mA */
> + bias-disable; /* NO PULL */
> + output-high;
> + };
> + };
> +
> + pri_mi2s_sleep: pri_mi2s_sleep {
> + mux {
> + pins = "gpio65", "gpio66";
> + function = "gpio";
> + };
> +
> + config {
> + pins = "gpio65", "gpio66";
> + drive-strength = <2>; /* 2 mA */
> + bias-pull-down; /* PULL DOWN */
> + input-enable;
> + };
> + };
> +
> + pri_mi2s_sd0_sleep: pri_mi2s_sd0_sleep {
> + mux {
> + pins = "gpio67";
> + function = "gpio";
> + };
> +
> + config {
> + pins = "gpio67";
> + drive-strength = <2>; /* 2 mA */
> + bias-pull-down; /* PULL DOWN */
> + input-enable;
> + };
> + };
> +
> + pri_mi2s_sd0_active: pri_mi2s_sd0_active {
> + mux {
> + pins = "gpio67";
> + function = "pri_mi2s";
> + };
> +
> + config {
> + pins = "gpio67";
> + drive-strength = <8>; /* 8 mA */
> + bias-disable; /* NO PULL */
> + };
> + };
> +
> + pri_mi2s_sd1_sleep: pri_mi2s_sd1_sleep {
> + mux {
> + pins = "gpio68";
> + function = "gpio";
> + };
> +
> + config {
> + pins = "gpio68";
> + drive-strength = <2>; /* 2 mA */
> + bias-pull-down; /* PULL DOWN */
> + input-enable;
> + };
> + };
> +
> + pri_mi2s_sd1_active: pri_mi2s_sd1_active {
> + mux {
> + pins = "gpio68";
> + function = "pri_mi2s";
> + };
> +
> + config {
> + pins = "gpio68";
> + drive-strength = <8>; /* 8 mA */
> + bias-disable; /* NO PULL */
> + };
> + };
> +
> + quat_mi2s_active: quat_mi2s_active {
> + mux {
> + pins = "gpio58", "gpio59";
> + function = "qua_mi2s";
> + };
> + config {
> + pins = "gpio58", "gpio59";
> + drive-strength = <8>; /* 8 mA */
> + bias-disable; /* NO PULL */
> + output-high;
> + };
> + };
> +
> + quat_mi2s_sleep: quat_mi2s_sleep {
> + mux {
> + pins = "gpio58", "gpio59";
> + function = "gpio";
> + };
> +
> + config {
> + pins = "gpio58", "gpio59";
> + drive-strength = <2>; /* 2 mA */
> + bias-pull-down; /* PULL DOWN */
> + input-enable;
> + };
> + };
> +
> + quat_mi2s_sd0_sleep: quat_mi2s_sd0_sleep {
> + mux {
> + pins = "gpio60";
> + function = "gpio";
> + };
> +
> + config {
> + pins = "gpio60";
> + drive-strength = <2>; /* 2 mA */
> + bias-pull-down; /* PULL DOWN */
> + input-enable;
> + };
> + };
> +
> + quat_mi2s_sd0_active: quat_mi2s_sd0_active {
> + mux {
> + pins = "gpio60";
> + function = "qua_mi2s";
> + };
> +
> + config {
> + pins = "gpio60";
> + drive-strength = <8>; /* 8 mA */
> + bias-disable; /* NO PULL */
> + };
> + };
> +
> + quat_mi2s_sd1_sleep: quat_mi2s_sd1_sleep {
> + mux {
> + pins = "gpio61";
> + function = "gpio";
> + };
> +
> + config {
> + pins = "gpio61";
> + drive-strength = <2>; /* 2 mA */
> + bias-pull-down; /* PULL DOWN */
> + input-enable;
> + };
> + };
> +
> + quat_mi2s_sd1_active: quat_mi2s_sd1_active {
> + mux {
> + pins = "gpio61";
> + function = "qua_mi2s";
> + };
> +
> + config {
> + pins = "gpio61";
> + drive-strength = <8>; /* 8 mA */
> + bias-disable; /* NO PULL */
> + };
> + };
> +
> sdc2_clk_on: sdc2_clk_on {
> config {
> pins = "sdc2_clk";
> --
> 2.21.1
>
More information about the Alsa-devel
mailing list