[PATCH 1/2] clk: tegra30: Add hda clock default rates to clock driver

[Peter Geis]

Current implementation defaults the hda clocks to clk_m.
This causes hda to run too slow to operate correctly.
Fix this by defaulting to pll_p and setting the frequency to the correct rate.

This matches upstream t124 and downstream t30.

Signed-off-by: Peter Geis <pgwipeout at gmail.com>
Tested-by: Ion Agorria <ion at agorria.com>
---
 drivers/clk/tegra/clk-tegra30.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 37244a7e68c2..9cf249c344d9 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1256,6 +1256,8 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_I2S3_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA30_CLK_I2S4_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA30_CLK_VIMCLK_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
+	{ TEGRA30_CLK_HDA, TEGRA30_CLK_PLL_P, 102000000, 0 },
+	{ TEGRA30_CLK_HDA2CODEC_2X, TEGRA30_CLK_PLL_P, 48000000, 0 },
 	/* must be the last entry */
 	{ TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0 },
 };
-- 
2.25.1