[PATCH alsa-ucm-conf 1/3] chtnau8824: Move DAC Channel Source selection to Speaker/Headphones EnableSeq

[Hans de Goede]

Move DAC Channel Source selection to Speaker/Headphones EnableSeq.

The main reason for doing this is to make it easier to allow using
variables, as the Speaker/Headphones conf files are evaluated after
the main HiFi.conf had a chance to set them.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 ucm2/codecs/nau8824/EnableSeq.conf   | 3 ---
 ucm2/codecs/nau8824/HeadPhones.conf  | 2 ++
 ucm2/codecs/nau8824/MonoSpeaker.conf | 2 ++
 ucm2/codecs/nau8824/Speaker.conf     | 2 ++
 4 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/ucm2/codecs/nau8824/EnableSeq.conf b/ucm2/codecs/nau8824/EnableSeq.conf
index 3650d06..2595e5f 100644
--- a/ucm2/codecs/nau8824/EnableSeq.conf
+++ b/ucm2/codecs/nau8824/EnableSeq.conf
@@ -1,7 +1,4 @@
 EnableSequence [
-	# Playback TDM configuration
-	cset "name='DACL Channel Source' 0"
-	cset "name='DACR Channel Source' 1"
 	# Input Configuration
 	cset "name='DMIC1 Enable Switch' off"
 	cset "name='DMIC2 Enable Switch' off"
diff --git a/ucm2/codecs/nau8824/HeadPhones.conf b/ucm2/codecs/nau8824/HeadPhones.conf
index a807f84..46ec5d7 100644
--- a/ucm2/codecs/nau8824/HeadPhones.conf
+++ b/ucm2/codecs/nau8824/HeadPhones.conf
@@ -12,6 +12,8 @@ SectionDevice."Headphones" {
 	]
 
 	EnableSequence [
+		cset "name='DACL Channel Source' 0"
+		cset "name='DACR Channel Source' 1"
 		cset "name='Headphone Switch' on"
 	]
 
diff --git a/ucm2/codecs/nau8824/MonoSpeaker.conf b/ucm2/codecs/nau8824/MonoSpeaker.conf
index 6b4ef8a..09edea5 100644
--- a/ucm2/codecs/nau8824/MonoSpeaker.conf
+++ b/ucm2/codecs/nau8824/MonoSpeaker.conf
@@ -11,6 +11,8 @@ SectionDevice."Speaker" {
 	]
 
 	EnableSequence [
+		cset "name='DACL Channel Source' 0"
+		cset "name='DACR Channel Source' 1"
 		# nau8824 mono speaker boards have the speaker on the right chan
 		cset "name='Speaker Left DACL Volume' 0"
 		cset "name='Speaker Left DACR Volume' 0"
diff --git a/ucm2/codecs/nau8824/Speaker.conf b/ucm2/codecs/nau8824/Speaker.conf
index a995873..64d7eee 100644
--- a/ucm2/codecs/nau8824/Speaker.conf
+++ b/ucm2/codecs/nau8824/Speaker.conf
@@ -11,6 +11,8 @@ SectionDevice."Speaker" {
 	]
 
 	EnableSequence [
+		cset "name='DACL Channel Source' 0"
+		cset "name='DACR Channel Source' 1"
 		cset "name='Speaker Left DACL Volume' 1"
 		cset "name='Speaker Left DACR Volume' 0"
 		cset "name='Speaker Right DACL Volume' 0"
-- 
2.28.0