[PATCH 3/5] ASoC: codecs/jz4770: Adjust timeouts for cap-coupled outputs
Paul Cercueil
paul at crapouillou.net
Mon Dec 7 13:53:35 CET 2020
From: Christophe Branchereau <cbranchereau at gmail.com>
When using cap-coupled outputs, the RUP/RDO can take much longer than
the 100ms timeout we used to have. Increase that timeout to one second.
Signed-off-by: Christophe Branchereau <cbranchereau at gmail.com>
Signed-off-by: Paul Cercueil <paul at crapouillou.net>
---
sound/soc/codecs/jz4770.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/jz4770.c b/sound/soc/codecs/jz4770.c
index 002f2300e750..0da966785aee 100644
--- a/sound/soc/codecs/jz4770.c
+++ b/sound/soc/codecs/jz4770.c
@@ -287,7 +287,7 @@ static int jz4770_codec_mute_stream(struct snd_soc_dai *dai, int mute, int direc
err = regmap_read_poll_timeout(jz_codec->regmap,
JZ4770_CODEC_REG_IFR,
val, val & gain_bit,
- 1000, 100 * USEC_PER_MSEC);
+ 1000, 1 * USEC_PER_SEC);
if (err) {
dev_err(jz_codec->dev,
"Timeout while setting digital mute: %d", err);
@@ -381,7 +381,7 @@ static int hpout_event(struct snd_soc_dapm_widget *w,
err = regmap_read_poll_timeout(jz_codec->regmap,
JZ4770_CODEC_REG_IFR,
val, val & REG_IFR_RUP,
- 1000, 100 * USEC_PER_MSEC);
+ 1000, 1 * USEC_PER_SEC);
if (err) {
dev_err(jz_codec->dev, "RUP timeout: %d", err);
return err;
@@ -401,7 +401,7 @@ static int hpout_event(struct snd_soc_dapm_widget *w,
err = regmap_read_poll_timeout(jz_codec->regmap,
JZ4770_CODEC_REG_IFR,
val, val & REG_IFR_RDO,
- 1000, 100 * USEC_PER_MSEC);
+ 1000, 1 * USEC_PER_SEC);
if (err) {
dev_err(jz_codec->dev, "RDO timeout: %d", err);
return err;
@@ -803,7 +803,7 @@ static int jz4770_codec_io_wait(struct jz_codec *codec)
return readl_poll_timeout(codec->base + ICDC_RGADW_OFFSET, reg,
!(reg & ICDC_RGADW_RGWR),
- 1000, 10 * USEC_PER_MSEC);
+ 1000, 1 * USEC_PER_SEC);
}
static int jz4770_codec_reg_read(void *context, unsigned int reg,
--
2.29.2
More information about the Alsa-devel
mailing list