[bug report] ASoC: mchp-spdifrx: add driver for SPDIF RX

[Dan Carpenter]

Hello Codrin Ciubotariu,

The patch ef265c55c1ac: "ASoC: mchp-spdifrx: add driver for SPDIF RX"
from Oct 2, 2020, leads to the following static checker warning:

	sound/soc/atmel/mchp-spdifrx.c:468 mchp_spdifrx_hw_params()
	warn: 'dev->gclk' not released on lines: 468.

sound/soc/atmel/mchp-spdifrx.c
   442                          params_format(params));
   443                  return -EINVAL;
   444          }
   445  
   446          if (dev->gclk_enabled) {
   447                  clk_disable_unprepare(dev->gclk);
   448                  dev->gclk_enabled = 0;
   449          }
   450          ret = clk_set_min_rate(dev->gclk, params_rate(params) *
   451                                            SPDIFRX_GCLK_RATIO_MIN + 1);
   452          if (ret) {
   453                  dev_err(dev->dev,
   454                          "unable to set gclk min rate: rate %u * ratio %u + 1\n",
   455                          params_rate(params), SPDIFRX_GCLK_RATIO_MIN);
   456                  return ret;
   457          }
   458          ret = clk_prepare_enable(dev->gclk);
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

   459          if (ret) {
   460                  dev_err(dev->dev, "unable to enable gclk: %d\n", ret);
   461                  return ret;
   462          }
   463          dev->gclk_enabled = 1;
   464  
   465          dev_dbg(dev->dev, "GCLK range min set to %d\n",
   466                  params_rate(params) * SPDIFRX_GCLK_RATIO_MIN + 1);
   467  
   468          return regmap_write(dev->regmap, SPDIFRX_MR, mr);
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Smatch is complaining that if the regmap_write() fails then we should
disable and unprepare the "dev->gclk".

   469  }

regards,
dan carpenter