[PATCH] ALSA: usb-audio: Add prevent wakeup from s3 state trig by Lenovo ThinkCentre TI024Gen3 USB-audio

Takashi Iwai tiwai at suse.de
Wed Aug 19 19:18:30 CEST 2020


[ Adding a few more relevant people to Cc. ]

On Wed, 19 Aug 2020 13:57:57 +0200,
penghao wrote:
> 
> TI024Gen3 USB-audio is controlled by TI024Gen3,when TI024Gens
> enter sleep mode, USB-audio will disconnect from USB bus port,
> wakup form s3 state
> 
> Signed-off-by: penghao <penghao at uniontech.com>
> ---
>  sound/usb/card.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/sound/usb/card.c b/sound/usb/card.c
> index 696e788c5d31..6bdbb34009b3 100644
> --- a/sound/usb/card.c
> +++ b/sound/usb/card.c
> @@ -658,6 +658,12 @@ static int usb_audio_probe(struct usb_interface *intf,
>  	}
>  
>  	dev_set_drvdata(&dev->dev, chip);
> +	/*
> +	 *ALSA: usb-audio: Add prevent wakeup from s3 state trig by Lenovo
> +	 *ThinkCentre TI024Gen3 usb-audio
> +	 */
> +	if ((usb_id->idVendor == 0x17ef) && (usb_id->idProduct == 0xa012))
> +		device_set_wakeup_enable(&dev->dev, 0);

Here it's no proper ASCII letter, and this must be broken.
Please check the actual patch before submitting.

In anyway, before going further, I'd like to hear from other people
whether this is really mandatory and appropriate.  And whether it's
specific to that device, too (not other Lenovo devices?)


thanks,

Takashi


More information about the Alsa-devel mailing list