[PATCH] dt-bindings: sound: Convert NXP spdif to json-schema
Rob Herring
robh at kernel.org
Mon Aug 17 23:52:08 CEST 2020
On Thu, Aug 06, 2020 at 01:17:57PM +0800, Anson Huang wrote:
> Convert the NXP SPDIF binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
> ---
> .../devicetree/bindings/sound/fsl,spdif.txt | 68 -------------
> .../devicetree/bindings/sound/fsl,spdif.yaml | 108 +++++++++++++++++++++
> 2 files changed, 108 insertions(+), 68 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt
> create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> deleted file mode 100644
> index e1365b0..0000000
> --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> +++ /dev/null
> @@ -1,68 +0,0 @@
> -Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
> -
> -The Freescale S/PDIF audio block is a stereo transceiver that allows the
> -processor to receive and transmit digital audio via an coaxial cable or
> -a fibre cable.
> -
> -Required properties:
> -
> - - compatible : Compatible list, should contain one of the following
> - compatibles:
> - "fsl,imx35-spdif",
> - "fsl,vf610-spdif",
> - "fsl,imx6sx-spdif",
> -
> - - reg : Offset and length of the register set for the device.
> -
> - - interrupts : Contains the spdif interrupt.
> -
> - - dmas : Generic dma devicetree binding as described in
> - Documentation/devicetree/bindings/dma/dma.txt.
> -
> - - dma-names : Two dmas have to be defined, "tx" and "rx".
> -
> - - clocks : Contains an entry for each entry in clock-names.
> -
> - - clock-names : Includes the following entries:
> - "core" The core clock of spdif controller.
> - "rxtx<0-7>" Clock source list for tx and rx clock.
> - This clock list should be identical to the source
> - list connecting to the spdif clock mux in "SPDIF
> - Transceiver Clock Diagram" of SoC reference manual.
> - It can also be referred to TxClk_Source bit of
> - register SPDIF_STC.
> - "spba" The spba clock is required when SPDIF is placed as a
> - bus slave of the Shared Peripheral Bus and when two
> - or more bus masters (CPU, DMA or DSP) try to access
> - it. This property is optional depending on the SoC
> - design.
> -
> -Optional properties:
> -
> - - big-endian : If this property is absent, the native endian mode
> - will be in use as default, or the big endian mode
> - will be in use for all the device registers.
> -
> -Example:
> -
> -spdif: spdif at 2004000 {
> - compatible = "fsl,imx35-spdif";
> - reg = <0x02004000 0x4000>;
> - interrupts = <0 52 0x04>;
> - dmas = <&sdma 14 18 0>,
> - <&sdma 15 18 0>;
> - dma-names = "rx", "tx";
> -
> - clocks = <&clks 197>, <&clks 3>,
> - <&clks 197>, <&clks 107>,
> - <&clks 0>, <&clks 118>,
> - <&clks 62>, <&clks 139>,
> - <&clks 0>;
> - clock-names = "core", "rxtx0",
> - "rxtx1", "rxtx2",
> - "rxtx3", "rxtx4",
> - "rxtx5", "rxtx6",
> - "rxtx7";
> -
> - big-endian;
> -};
> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
> new file mode 100644
> index 0000000..819f37f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml
> @@ -0,0 +1,108 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
> +
> +maintainers:
> + - Shengjiu Wang <shengjiu.wang at nxp.com>
> +
> +description: |
> + The Freescale S/PDIF audio block is a stereo transceiver that allows the
> + processor to receive and transmit digital audio via an coaxial cable or
> + a fibre cable.
> +
> +properties:
> + compatible:
> + enum:
> + - fsl,imx35-spdif
> + - fsl,vf610-spdif
> + - fsl,imx6sx-spdif
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + dmas:
> + items:
> + - description: DMA controller phandle and request line for RX
> + - description: DMA controller phandle and request line for TX
> +
> + dma-names:
> + items:
> + - const: rx
> + - const: tx
> +
> + clocks:
> + items:
> + - description: The core clock of spdif controller.
> + - description: Clock for tx0 and rx0.
> + - description: Clock for tx1 and rx1.
> + - description: Clock for tx2 and rx2.
> + - description: Clock for tx3 and rx3.
> + - description: Clock for tx4 and rx4.
> + - description: Clock for tx5 and rx5.
> + - description: Clock for tx6 and rx6.
> + - description: Clock for tx7 and rx7.
> + - description: The spba clock is required when SPDIF is placed as a bus
> + slave of the Shared Peripheral Bus and when two or more bus masters
> + (CPU, DMA or DSP) try to access it. This property is optional depending
> + on the SoC design.
> + minItems: 9
> +
> + clock-names:
> + items:
> + - const: core
> + - const: rxtx0
> + - const: rxtx1
> + - const: rxtx2
> + - const: rxtx3
> + - const: rxtx4
> + - const: rxtx5
> + - const: rxtx6
> + - const: rxtx7
> + - const: spba
> + minItems: 9
> +
> + big-endian:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: |
> + If this property is absent, the native endian mode will be in use
> + as default, or the big endian mode will be in use for all the device
> + registers. Set this flag for HCDs with big endian descriptors and big
> + endian registers.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - dmas
> + - dma-names
> + - clocks
> + - clock-names
Add:
additionalProperties: false
With that added,
Reviewed-by: Rob Herring <robh at kernel.org>
> +
> +examples:
> + - |
> + spdif at 2004000 {
> + compatible = "fsl,imx35-spdif";
> + reg = <0x02004000 0x4000>;
> + interrupts = <0 52 0x04>;
> + dmas = <&sdma 14 18 0>,
> + <&sdma 15 18 0>;
> + dma-names = "rx", "tx";
> + clocks = <&clks 197>, <&clks 3>,
> + <&clks 197>, <&clks 107>,
> + <&clks 0>, <&clks 118>,
> + <&clks 62>, <&clks 139>,
> + <&clks 0>;
> + clock-names = "core", "rxtx0",
> + "rxtx1", "rxtx2",
> + "rxtx3", "rxtx4",
> + "rxtx5", "rxtx6",
> + "rxtx7";
> + big-endian;
> + };
> --
> 2.7.4
>
More information about the Alsa-devel
mailing list