[PATCH v3 2/2] ASoC: Intel: Add period size constraint on strago board

[Takashi Iwai]

On Wed, 12 Aug 2020 16:46:40 +0200,
Pierre-Louis Bossart wrote:
> 
> 
> >>>>>> After doing some experiments, I think I can identify the problem more precisely.
> >>>>>> 1. aplay can not reproduce this issue because it writes samples
> >>>>>> immediately when there are some space in the buffer. However, you can
> >>>>>> add --test-position to see how the delay grows with period size 256.
> >>>>>>> aplay -Dhw:1,0 --period-size=256 --buffer-size=480 /dev/zero -d 1 -f dat --test-position
> >>>>>> Playing raw data '/dev/zero' : Signed 16 bit Little Endian, Rate 48000
> >>>>>> Hz, Stereo
> >>>>>> Suspicious buffer position (1 total): avail = 0, delay = 2064, buffer = 512
> >>>>>> Suspicious buffer position (2 total): avail = 0, delay = 2064, buffer = 512
> >>>>>> Suspicious buffer position (3 total): avail = 0, delay = 2096, buffer = 512
> >>>>>> ...
> >>>>>
> >>>>> Isn't this about the alignment of the buffer size against the period
> >>>>> size, not the period size itself?  i.e. in the example above, the
> >>>>> buffer size isn't a multiple of period size, and DSP can't handle if
> >>>>> the position overlaps the buffer size in a half way.
> >>>>>
> >>>>> If that's the problem (and it's an oft-seen restriction), the right
> >>>>> constraint is
> >>>>>    snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
> >>>>>
> >>>>>
> >>>>> Takashi
> >>>> Oh sorry for my typo. The issue happens no matter what buffer size is
> >>>> set. Actually, even if I want to set 480, it will change to 512
> >>>> automatically.
> >>>> Suspicious buffer position (1 total): avail = 0, delay = 2064, buffer
> >>>> = 512 <-this one is the buffer size
> >>>
> >>> OK, then it means that the buffer size alignment is already in place.
> >>>
> >>> And this large delay won't happen if you use period size 240?
> >>>
> >>>
> >>> Takashi
> >> Yes! If I set the period size to 240, it will not print "Suspicious
> >> buffer position ..."
> >
> > So it sounds like DSP handles the delay report incorrectly.
> > Then it comes to another question: the driver supports both SOF and
> > SST.  Is there the behavior difference between both DSPs wrt this
> > delay issue?
> 
> I still don't get what the issue is. The two following cases work fine
> with the SST/Atom driver:
> 
> root at chrx:~# aplay -Dhw:0,0 --period-size=240 --buffer-size=480
> /dev/zero -d 2 -f dat --test-position
> Playing raw data '/dev/zero' : Signed 16 bit Little Endian, Rate 48000
> Hz, Stereo
> root at chrx:~# aplay -Dhw:0,0 --period-size=960 --buffer-size=4800
> /dev/zero -d 2 -f dat --test-position
> Playing raw data '/dev/zero' : Signed 16 bit Little Endian, Rate 48000
> Hz, Stereo

What if with --period-size=256 --buffer-size=512 and --test-position?
Can you reproduce the problem in your side?

> The existing code has this:
> 
> 	/* Make sure, that the period size is always even */
> 	snd_pcm_hw_constraint_step(substream->runtime, 0,
> 			   SNDRV_PCM_HW_PARAM_PERIODS, 2);
> 
> 	return snd_pcm_hw_constraint_integer(runtime,
> 			 SNDRV_PCM_HW_PARAM_PERIODS);
> 
> and with the addition of period size being a multiple of 1ms all
> requirements should be met?

I also wonder what's really missing, too :)

BTW, I took a look back at the thread, and CRAS seems using a very
large buffer, namely:
[   52.434791] sound pcmC1D0p:   PERIOD_SIZE [240:240]
[   52.434802] sound pcmC1D0p:   BUFFER_SIZE [204480:204480]


Takashi