[PATCH 2/2] ASoC: q6routing: add dummy register read function

[Srinivas Kandagatla]

Most of the DAPM widgets for DSP ASoC components reuse reg field
of the widgets for its internal calculations, however these are not
real registers. So read/writes to these numbers are not really
valid. However ASoC core will read these registers to get default
state during startup.

With recent changes to ASoC core, every register read/write
failures are reported very verbosely. Prior to this fails to reads
are totally ignored, so we never saw any error messages.

To fix this add dummy read function to return default value.

Reported-by: John Stultz <john.stultz at linaro.org>
Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
 sound/soc/qcom/qdsp6/q6routing.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c
index eaa95b5a7b66..fb7c4b266d19 100644
--- a/sound/soc/qcom/qdsp6/q6routing.c
+++ b/sound/soc/qcom/qdsp6/q6routing.c
@@ -973,6 +973,13 @@ static int msm_routing_probe(struct snd_soc_component *c)
 	return 0;
 }
 
+static unsigned int q6routing_reg_read(struct snd_soc_component *component,
+				       unsigned int reg)
+{
+	/* default value */
+	return 0;
+}
+
 static const struct snd_soc_component_driver msm_soc_routing_component = {
 	.probe = msm_routing_probe,
 	.name = DRV_NAME,
@@ -981,6 +988,7 @@ static const struct snd_soc_component_driver msm_soc_routing_component = {
 	.num_dapm_widgets = ARRAY_SIZE(msm_qdsp6_widgets),
 	.dapm_routes = intercon,
 	.num_dapm_routes = ARRAY_SIZE(intercon),
+	.read = q6routing_reg_read,
 };
 
 static int q6pcm_routing_probe(struct platform_device *pdev)
-- 
2.21.0