[PATCH AUTOSEL 4.9 04/17] ASoC: sgtl5000: Fix VAG power-on handling

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel at collabora.com>

[ Upstream commit aa7812737f2877e192d57626cbe8825cc7cf6de9 ]

As mentioned slightly out of patch context in the code, there
is no reset routine for the chip. On boards where the chip is
supplied by a fixed regulator, it might not even be resetted
during (e.g. watchdog) reboot and can be in any state.

If the device is probed with VAG enabled, the driver's probe
routine will generate a loud pop sound when ANA_POWER is
being programmed. Avoid this by properly disabling just the
VAG bit and waiting the required power down time.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
Reviewed-by: Fabio Estevam <festivem at gmail.com>
Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 34 ++++++++++++++++++++++++++++++++++
 sound/soc/codecs/sgtl5000.h |  1 +
 2 files changed, 35 insertions(+)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 39810b713d5f2..0c2a1413a8f57 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1464,6 +1464,40 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
 		dev_err(&client->dev,
 			"Error %d initializing CHIP_CLK_CTRL\n", ret);
 
+	/* Mute everything to avoid pop from the following power-up */
+	ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+			   SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+	if (ret) {
+		dev_err(&client->dev,
+			"Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+		goto disable_clk;
+	}
+
+	/*
+	 * If VAG is powered-on (e.g. from previous boot), it would be disabled
+	 * by the write to ANA_POWER in later steps of the probe code. This
+	 * may create a loud pop even with all outputs muted. The proper way
+	 * to circumvent this is disabling the bit first and waiting the proper
+	 * cool-down time.
+	 */
+	ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+	if (ret) {
+		dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+		goto disable_clk;
+	}
+	if (value & SGTL5000_VAG_POWERUP) {
+		ret = regmap_update_bits(sgtl5000->regmap,
+					 SGTL5000_CHIP_ANA_POWER,
+					 SGTL5000_VAG_POWERUP,
+					 0);
+		if (ret) {
+			dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+			goto disable_clk;
+		}
+
+		msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+	}
+
 	/* Follow section 2.2.1.1 of AN3663 */
 	ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
 	if (sgtl5000->num_supplies <= VDDD) {
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index 22f3442af9826..9ea41749d0375 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -236,6 +236,7 @@
 /*
  * SGTL5000_CHIP_ANA_CTRL
  */
+#define SGTL5000_CHIP_ANA_CTRL_DEFAULT		0x0133
 #define SGTL5000_LINE_OUT_MUTE			0x0100
 #define SGTL5000_HP_SEL_MASK			0x0040
 #define SGTL5000_HP_SEL_SHIFT			6
-- 
2.20.1