[PATCH v3 7/7] arm64: dts: sun50i-h6: Add HDMI audio to H6 DTSI
Clément Péron
peron.clem at gmail.com
Sun Apr 26 13:51:19 CEST 2020
Hi,
On Sun, 26 Apr 2020 at 12:41, Clément Péron <peron.clem at gmail.com> wrote:
>
> From: Jernej Skrabec <jernej.skrabec at siol.net>
>
> Add a simple-soundcard to link audio between HDMI and I2S.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
> Signed-off-by: Marcus Cooper <codekipper at gmail.com>
> Signed-off-by: Clément Péron <peron.clem at gmail.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 31 ++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index a5ee68388bd3..558fe63739cb 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -88,6 +88,24 @@
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> };
>
> + sound_hdmi: sound {
I will rename this to
hdmi_sound: hdmi-sound {
in the next version
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,name = "allwinner-hdmi";
> + simple-audio-card,mclk-fs = <128>;
> + simple-audio-card,frame-inversion;
And I will add a status="disabled" here as not all board have an hdmi connector
Regards,
Clement
> +
> + simple-audio-card,codec {
> + sound-dai = <&hdmi>;
> + };
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s1>;
> + dai-tdm-slot-num = <2>;
> + dai-tdm-slot-width = <32>;
> + };
> + };
> +
> soc {
> compatible = "simple-bus";
> #address-cells = <1>;
> @@ -581,6 +599,18 @@
> };
> };
>
> + i2s1: i2s at 5091000 {
> + #sound-dai-cells = <0>;
> + compatible = "allwinner,sun50i-h6-i2s";
> + reg = <0x05091000 0x1000>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
> + clock-names = "apb", "mod";
> + dmas = <&dma 4>, <&dma 4>;
> + resets = <&ccu RST_BUS_I2S1>;
> + dma-names = "rx", "tx";
> + };
> +
> spdif: spdif at 5093000 {
> #sound-dai-cells = <0>;
> compatible = "allwinner,sun50i-h6-spdif";
> @@ -711,6 +741,7 @@
> };
>
> hdmi: hdmi at 6000000 {
> + #sound-dai-cells = <0>;
> compatible = "allwinner,sun50i-h6-dw-hdmi";
> reg = <0x06000000 0x10000>;
> reg-io-width = <1>;
> --
> 2.20.1
>
More information about the Alsa-devel
mailing list