[alsa-devel] [PATCH v1 3/9] ASoC: wm8994: Add support for setting MCLKn clock rate

[Sylwester Nawrocki]

Extend the set_sysclk() handler so we also set frequency of the MCLK1,
MCLK2 clocks through clk API when those clocks are specified in DT for
the device.

Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
---
 sound/soc/codecs/wm8994.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index d5fb7f5dd551..b6b0842ae1fc 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -2372,12 +2372,30 @@ static int wm8994_set_fll(struct snd_soc_dai *dai, int id, int src,
 	return _wm8994_set_fll(dai->component, id, src, freq_in, freq_out);
 }
 
+static int wm8994_set_mclk_rate(struct wm8994_priv *wm8994, unsigned int id,
+				unsigned int *freq)
+{
+	struct wm8994 *control = wm8994->wm8994;
+	int ret;
+
+	if (!control->mclk[id].clk || *freq == wm8994->mclk[id])
+		return 0;
+
+	ret = clk_set_rate(control->mclk[id].clk, *freq);
+	if (ret < 0)
+		return ret;
+
+	*freq = clk_get_rate(control->mclk[id].clk);
+
+	return 0;
+}
+
 static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_component *component = dai->component;
 	struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
-	int i;
+	int ret, i;
 
 	switch (dai->id) {
 	case 1:
@@ -2392,6 +2410,11 @@ static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
 	switch (clk_id) {
 	case WM8994_SYSCLK_MCLK1:
 		wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_MCLK1;
+
+		ret = wm8994_set_mclk_rate(wm8994, dai->id - 1, &freq);
+		if (ret < 0)
+			return ret;
+
 		wm8994->mclk[0] = freq;
 		dev_dbg(dai->dev, "AIF%d using MCLK1 at %uHz\n",
 			dai->id, freq);
@@ -2400,6 +2423,11 @@ static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
 	case WM8994_SYSCLK_MCLK2:
 		/* TODO: Set GPIO AF */
 		wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_MCLK2;
+
+		ret = wm8994_set_mclk_rate(wm8994, dai->id - 1, &freq);
+		if (ret < 0)
+			return ret;
+
 		wm8994->mclk[1] = freq;
 		dev_dbg(dai->dev, "AIF%d using MCLK2 at %uHz\n",
 			dai->id, freq);
-- 
2.17.1