[alsa-devel] [PATCH 8/8] ASoC: tegra: take packing settings from the audio cif_config

Sameer Pujar spujar at nvidia.com
Wed Sep 18 12:02:32 CEST 2019


On 9/18/2019 2:46 PM, Jon Hunter wrote:
> On 17/09/2019 19:12, Ben Dooks wrote:
>> If the CIF is not configured as 16 or 8 bit, then the
>> packing for 8/16 bits should not be enabled as the
>> hardware only supports 8 or 16 bit packing.
>>
>> Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
>> ---
>>   sound/soc/tegra/tegra30_ahub.c | 29 +++++++++++++++++++++--------
>>   1 file changed, 21 insertions(+), 8 deletions(-)
>>
>> diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c
>> index 58e05ceb86da..c2f2e29dd32e 100644
>> --- a/sound/soc/tegra/tegra30_ahub.c
>> +++ b/sound/soc/tegra/tegra30_ahub.c
>> @@ -96,10 +96,17 @@ int tegra30_ahub_setup_rx_fifo(enum tegra30_ahub_rxcif rxcif,
>>   	      (channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);
>>   	val = tegra30_apbif_read(reg);
>>   	val &= ~(TEGRA30_AHUB_CHANNEL_CTRL_RX_THRESHOLD_MASK |
>> -		 TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_MASK);
>> -	val |= (7 << TEGRA30_AHUB_CHANNEL_CTRL_RX_THRESHOLD_SHIFT) |
>> -	       TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_EN |
>> -	       TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_16;
>> +		 TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_MASK |
>> +		 TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_EN);
>> +	val |= (7 << TEGRA30_AHUB_CHANNEL_CTRL_RX_THRESHOLD_SHIFT);
>> +	if (cif_conf->audio_bits == TEGRA30_AUDIOCIF_BITS_16 ||
>> +	    cif_conf->audio_bits == TEGRA30_AUDIOCIF_BITS_8)
>> +		val |= TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_EN;
>> +	if (cif_conf->audio_bits == TEGRA30_AUDIOCIF_BITS_16)
>> +		val |= TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_16;
>> +	if (cif_conf->audio_bits == TEGRA30_AUDIOCIF_BITS_8)
>> +		val |= TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_8_4;
>> +
> Ah maybe this is what I am missing from the previous patch. So the last
> patch was a preparatory patch for this one.
>
> Sameer, how is this handled in the case of Tegra210?
For Tegra210 we have a separate driver for ADMAIF. Packing and CIF 
configuration
is programmed in its hw_param() callback.
> Cheers
> Jon
>


More information about the Alsa-devel mailing list