[alsa-devel] [PATCH 2/8] ASoC: tegra: Allow 24bit and 32bit samples

Pierre-Louis Bossart pierre-louis.bossart at linux.intel.com
Tue Sep 17 20:26:15 CEST 2019


On 9/17/19 1:12 PM, Ben Dooks wrote:
> From: Edward Cragg <edward.cragg at codethink.co.uk>
> 
> The tegra3 audio can support 24 and 32 bit sample sizes so add the
>   option to the tegra30_i2s_hw_params to configure the S24_LE or
>   S32_LE formats when requested.
> 
> Signed-off-by: Edward Cragg <edward.cragg at codethink.co.uk>
> [ben.dooks at codethink.co.uk: fixup merge of 24 and 32bit]
> [ben.dooks at codethink.co.uk: add pm calls around ytdm config]
> [ben.dooks at codethink.co.uk: remove debug prints]

You need to add your own Signed-off-by when sending patches from other 
people


> ---
> squash 5aeca5a055fd ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
> 
> ASoC: tegra: i2s: pm_runtime_get_sync() is needed in tdm code
> ---
>   sound/soc/tegra/tegra30_i2s.c | 32 +++++++++++++++++++++++---------
>   1 file changed, 23 insertions(+), 9 deletions(-)
> 
> diff --git a/sound/soc/tegra/tegra30_i2s.c b/sound/soc/tegra/tegra30_i2s.c
> index d36b4662b420..b5372839f672 100644
> --- a/sound/soc/tegra/tegra30_i2s.c
> +++ b/sound/soc/tegra/tegra30_i2s.c
> @@ -127,7 +127,7 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
>   	struct device *dev = dai->dev;
>   	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>   	unsigned int mask, val, reg;
> -	int ret, sample_size, srate, i2sclock, bitcnt;
> +	int ret, sample_size, srate, i2sclock, bitcnt, audio_bits;
>   	struct tegra30_ahub_cif_conf cif_conf;
>   
>   	if (params_channels(params) != 2)
> @@ -137,8 +137,19 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
>   	switch (params_format(params)) {
>   	case SNDRV_PCM_FORMAT_S16_LE:
>   		val = TEGRA30_I2S_CTRL_BIT_SIZE_16;
> +		audio_bits = TEGRA30_AUDIOCIF_BITS_16;
>   		sample_size = 16;
>   		break;
> +	case SNDRV_PCM_FORMAT_S24_LE:
> +		val = TEGRA30_I2S_CTRL_BIT_SIZE_24;
> +		audio_bits = TEGRA30_AUDIOCIF_BITS_24;
> +		sample_size = 24;
> +		break;
> +	case SNDRV_PCM_FORMAT_S32_LE:
> +		val = TEGRA30_I2S_CTRL_BIT_SIZE_32;
> +		audio_bits = TEGRA30_AUDIOCIF_BITS_32;
> +		sample_size = 32;
> +		break;
>   	default:
>   		return -EINVAL;
>   	}
> @@ -170,8 +181,8 @@ static int tegra30_i2s_hw_params(struct snd_pcm_substream *substream,
>   	cif_conf.threshold = 0;
>   	cif_conf.audio_channels = 2;
>   	cif_conf.client_channels = 2;
> -	cif_conf.audio_bits = TEGRA30_AUDIOCIF_BITS_16;
> -	cif_conf.client_bits = TEGRA30_AUDIOCIF_BITS_16;
> +	cif_conf.audio_bits = audio_bits;
> +	cif_conf.client_bits = audio_bits;
>   	cif_conf.expand = 0;
>   	cif_conf.stereo_conv = 0;
>   	cif_conf.replicate = 0;
> @@ -264,10 +275,6 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai *dai,
>   	struct tegra30_i2s *i2s = snd_soc_dai_get_drvdata(dai);
>   	unsigned int mask = 0, val = 0;
>   
> -	dev_info(dai->dev, "%s: setting TDM: tx_mask: 0x%08x rx_mask: 0x%08x "
> -		 "slots: 0x%08x " "width: %d\n",
> -		 __func__, tx_mask, rx_mask, slots, slot_width);
> -

This should be squashed in the previous patch

>   	/* Set up slots and tx/rx masks */
>   	mask = TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK |
>   	       TEGRA30_I2S_SLOT_CTRL_RX_SLOT_ENABLES_MASK |
> @@ -277,6 +284,8 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai *dai,
>   	      (rx_mask << TEGRA30_I2S_SLOT_CTRL_RX_SLOT_ENABLES_SHIFT) |
>   	      ((slots - 1) << TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_SHIFT);
>   
> +	pm_runtime_get_sync(dai->dev);
> +
>   	regmap_update_bits(i2s->regmap, TEGRA30_I2S_SLOT_CTRL, mask, val);
>   
>   	/* Set FSYNC width */
> @@ -284,6 +293,7 @@ static int tegra30_i2s_set_tdm(struct snd_soc_dai *dai,
>   		TEGRA30_I2S_CH_CTRL_FSYNC_WIDTH_MASK,
>   		(slot_width - 1) << TEGRA30_I2S_CH_CTRL_FSYNC_WIDTH_SHIFT);
>   
> +	pm_runtime_put(dai->dev);

same for PM stuff, it's not related to 24/32 bit samples

>   	return 0;
>   }
>   
> @@ -311,14 +321,18 @@ static const struct snd_soc_dai_driver tegra30_i2s_dai_template = {
>   		.channels_min = 2,
>   		.channels_max = 2,
>   		.rates = SNDRV_PCM_RATE_8000_96000,
> -		.formats = SNDRV_PCM_FMTBIT_S16_LE,
> +		.formats = SNDRV_PCM_FMTBIT_S32_LE |
> +			   SNDRV_PCM_FMTBIT_S24_LE |
> +			   SNDRV_PCM_FMTBIT_S16_LE,
>   	},
>   	.capture = {
>   		.stream_name = "Capture",
>   		.channels_min = 2,
>   		.channels_max = 2,
>   		.rates = SNDRV_PCM_RATE_8000_96000,
> -		.formats = SNDRV_PCM_FMTBIT_S16_LE,
> +		.formats = SNDRV_PCM_FMTBIT_S32_LE |
> +			   SNDRV_PCM_FMTBIT_S24_LE |
> +			   SNDRV_PCM_FMTBIT_S16_LE,
>   	},
>   	.ops = &tegra30_i2s_dai_ops,
>   	.symmetric_rates = 1,
> 



More information about the Alsa-devel mailing list